cz-milan Posted November 16, 2014 Share Posted November 16, 2014 Hello, does exist any MIDI CC Comand for remote control of POD HD500 Channel Volume ? Is there anybody here to help me ? Thanks Milan Quote Link to comment Share on other sites More sharing options...
pugdealer Posted November 16, 2014 Share Posted November 16, 2014 Yeah there is! CC1 will command volume. What exactly and how are u trying to do it? Quote Link to comment Share on other sites More sharing options...
cz-milan Posted November 16, 2014 Author Share Posted November 16, 2014 Oh, thank you for your prompt response. I ll try it in a while and give you a feedback. Milan Quote Link to comment Share on other sites More sharing options...
cz-milan Posted November 16, 2014 Author Share Posted November 16, 2014 Hello as I have onboard pedal assigned to EXP2 I used CC2 MIDI Command. Volume now can be controlled remotely by MIDI but, onboard pedal now does not affects on volume, and both red and green LEDs are lit as if external pedal was connected to POD. But it was not connected. I connected external pedal EX-1 to POD and after that I can control volume remotely via MIDI CC and by means of external pedal as well. But my original question concerned the remote control of AMP Model Volume . Any other advice? :( Milan Quote Link to comment Share on other sites More sharing options...
pugdealer Posted November 16, 2014 Share Posted November 16, 2014 I'm sorry but I couldn't understand what you mean... What exactly are u trying to do? If you want to control amp volume, first you have to assign that parameter to the specific expression pedal you want, then it can be controlled over MIDI Quote Link to comment Share on other sites More sharing options...
cz-milan Posted November 17, 2014 Author Share Posted November 17, 2014 O.K. You are right. Thank you. I need this access for my special purpose only. I own my Old Gold POD2 and it allows direct remote access to all AMP knobs. I hoped there was a similar possibility on POD HD500. I ve had a look to POD HD manual and there is no such possibility described there. Milan Quote Link to comment Share on other sites More sharing options...
Rewolf48 Posted November 17, 2014 Share Posted November 17, 2014 I connected external pedal EX-1 to POD and after that I can control volume remotely via MIDI CC and by means of external pedal as well. If I understand you correctly, you have a volume/level parameter being controlled by Exp2, and are using CC2 to vary the value of Exp2 and nothing happens, unless you plug an expression pedal in to the HD500 when it works as expected for both the pedal and MIDI control. I haven't had a chance to test this, but it appears to be a fault in the HD firmware to me - you should be able to control Exp2 over MIDI without having a pedal connected. Has anybody else seen this? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.