Segomil Posted March 4, 2015 Share Posted March 4, 2015 Hi ! I'm i right : the HD500X is like a Guitar Ampli ? If it's the case, i really need a cabinet to plug to my HD500X...it's for my JTV69 & Strat fender ... The goal is to save my Presonus Eris 8 (for recording use)... It's for home studio, i do not need a powefull cabinet. The cabinet will be place between the 2 Eris 8 . Any suggestion will be appreciate ! Now the question is : how to redirect the guitar signal through the cabinet only & for the midi through the Eris 8 (midi signal) ??? I'm dead because i try many time to have micro & guitar signals in different channel to play together without having the same effect FX ... & i have failed I'M DEAD ! Thank you all Daniel 1 Quote Link to comment Share on other sites More sharing options...
Charlie_Watt Posted March 4, 2015 Share Posted March 4, 2015 No. The HD500X is not an amplifier at all. It plugs into the front of an amp or into a PA but not directly into a speaker cab. It will not drive a speaker directly. Quote Link to comment Share on other sites More sharing options...
amsdenj Posted March 4, 2015 Share Posted March 4, 2015 Not sure I understand your second question. I think you are attempting to put two devices into the HD500X, perhaps a guitar and the output of a MIDI keyboard. And you want different effects on each device. To do that, you would leverage the A and B signal paths in the HD500X. Set the input for the A path to Guitar, and probably Aux for the keyboard. Put all the guitar effects and amplifier blocks in the A path, and all the keyboard blocks in the B path. Then use the mixer at the end of both paths to blend them together. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.