rfmason Posted June 11, 2015 Share Posted June 11, 2015 Can I power the Relay G70 receiver with a Voodoo Labs Pedal Power 2 (the older version, not the 2 Plus)? If not, can I assume a Pedal Power 2 Plus would work? Thanks in advance ! Quote Link to comment Share on other sites More sharing options...
ArneLine6 Posted June 11, 2015 Share Posted June 11, 2015 We recommend a minimum of 400mA, it is actually rated at 500mA. Quote Link to comment Share on other sites More sharing options...
erich Posted June 16, 2015 Share Posted June 16, 2015 The manual says 350ma is it a mistake then? Quote Link to comment Share on other sites More sharing options...
ArneLine6 Posted June 17, 2015 Share Posted June 17, 2015 No, sorry, 350 is right. Quote Link to comment Share on other sites More sharing options...
erich Posted June 17, 2015 Share Posted June 17, 2015 Thanks but this is a bit confusing. On the back of the receiver it is written 9VDC - 500mA but in the manual 350mA. Can you confirm please this is really 350mA as I don't want to damage it? Thanks! Quote Link to comment Share on other sites More sharing options...
ArneLine6 Posted June 18, 2015 Share Posted June 18, 2015 You won't damage it :-) You're right it is confusing. One spec is to show the maximum for safety reasons, the other one is practical and shows what works. Quote Link to comment Share on other sites More sharing options...
erich Posted June 18, 2015 Share Posted June 18, 2015 Ok great thanks! Then those owning the pedal power 2+ you can use 250mA+100mA outputs with current doubler cable :) Quote Link to comment Share on other sites More sharing options...
satch4u4 Posted July 3, 2015 Share Posted July 3, 2015 I just picked up a G70 yesterday and am wondering about powering it with the Pedal Power 2 Plus. So this current doubler cable.... Is this the same hook ups required to power the eventide pedals(TimeFactor, ModFactor)? Quote Link to comment Share on other sites More sharing options...
kip0992 Posted April 4, 2018 Share Posted April 4, 2018 So I recently got a G70 which I intended to power with my Voodoo PP2+. The "typical" PP2+ outlets (9v, 100mA) won't power the G70 up at all. I talked to Voodoo tech support and they sent a current doubler cable for me to try (it is a 2 into one cable where you combine 2 PP2+ outlets). Using it on either a 100mA + 250mA outlet or on the 2 250mA outlets the G70 powers up and works... However there is a buzz / hum. If you use the adapter that came with the G70 (the micro USB thing) there is no noise. Quote Link to comment Share on other sites More sharing options...
willkiss Posted January 28, 2020 Share Posted January 28, 2020 Will a MXR dc power brick power the Relay G 70 Thanks Quote Link to comment Share on other sites More sharing options...
Mruelas1438 Posted June 5, 2021 Share Posted June 5, 2021 I have my g70 connected to an Aetos by Walrus Audio powering my G70 at the 9VDC 300mA connection and it powers it on and works, so I didn't give it a second thought. But last night at a show my G70 kept shutting off and at one point it automatically ran a factory reset. Would it missing those 50mA cause this issue? If so would a current doubler between the 300mA and 100mA do the trick in fixing this issue? Thank you Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.