bond19 Posted June 12, 2015 Share Posted June 12, 2015 I have been organizing patches and banks on the Firehawk, and was finding it hard to remember the locations. One thing that I am finding which really helps, is having the app open to the bank page on my tablet , which sits on top of my amp. That way by quickly glancing at it, I have a cheat sheet to patch locations. By the way, the Higher rubber feet on the back row work like a charm. Quote Link to comment Share on other sites More sharing options...
urbanspaceblast Posted June 12, 2015 Share Posted June 12, 2015 A handy tip, thanks. My rubber feet will arrive next week. Cost £1.89. Quote Link to comment Share on other sites More sharing options...
urbanspaceblast Posted June 21, 2015 Share Posted June 21, 2015 I finally got around to swapping the rubber feet today. The original feet are 5.5mm high, the new ones are 10.5mm. The swap equates to an increase of just 2.5mm at the bank up switch. A small change but surprisingly this is enough for me not to hit the patch switches unintentionally. I didn't need to change the original screws. Quote Link to comment Share on other sites More sharing options...
mcbeddall Posted June 21, 2015 Share Posted June 21, 2015 Sounds like you can apply a simple formula to attain your desired switch height, so I might try and go for a 5mm difference in height by getting some feet about 15mm high Quote Link to comment Share on other sites More sharing options...
jonhollis Posted June 27, 2015 Share Posted June 27, 2015 do you get these feet from line6 - or just a hardware store? Quote Link to comment Share on other sites More sharing options...
urbanspaceblast Posted June 27, 2015 Share Posted June 27, 2015 Got mine from eBay UK. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.