mjakober Posted July 6, 2015 Share Posted July 6, 2015 OK so here is what I want. I have a Peavey JSX head and cab what I want is the amps preamp and the Firehawks FX effects. but I'm confused about the connections. Here is what I have currently. if some can help I would appreciate it. Quote Link to comment Share on other sites More sharing options...
bond19 Posted July 6, 2015 Share Posted July 6, 2015 basically it boils down to - do you want your amplifier's preamp sound to be used in your sound via effects loop? If the answer is no(becasue you are using the amp models on the firehawk), then just plug your left mono out uinto the effects return on your amp, and crank the return level to 100% wet. That will give you the true sound of the pedal without any sound from your amp. Quote Link to comment Share on other sites More sharing options...
urbanspaceblast Posted July 6, 2015 Share Posted July 6, 2015 OK so here is what I want. I have a Peavey JSX head and cab what I want is the amps preamp and the Firehawks FX effects. but I'm confused about the connections. Here is what I have currently. if some can help I would appreciate it. Using the Firehawk for effects only, no modelling? Looks fine to me. Create your patch to include the FXloop and raise the FXloop mix to 100% Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.