AntonisPat Posted October 22, 2015 Share Posted October 22, 2015 Hi all I'm not sure if this is the right category to post this topic, but here goes.. I've got a spider valve 112 MKii and an FBV shortboard mkII. I also have the UX2 sound card which I use with pod farm 2 software. Now I use the shortboard to do all the good things I can do with the Spider Valve, but I also want to use it as a controller for the pod farm. I've read the FBV manual and I've seen I can do that and also save setting patches for the FBV. My question is this, if I connect the FBV to my computer and farm2, change settings and save a patch and then unplug everything and plug the FBV to the Spider Valve, will it work as before? Or do I have to save a special patch for the SV somewhere and load it everytime I want to use it with my amp? I guess whatever the answer is, the same would be true for the FBV Express mkii, right? Thanks in advance!! Quote Link to comment Share on other sites More sharing options...
AntonisPat Posted October 25, 2015 Author Share Posted October 25, 2015 Noone?? Quote Link to comment Share on other sites More sharing options...
napynap Posted October 29, 2015 Share Posted October 29, 2015 ...My question is this, if I connect the FBV to my computer and farm2, change settings and save a patch and then unplug everything and plug the FBV to the Spider Valve, will it work as before? Or do I have to save a special patch for the SV somewhere and load it everytime I want to use it with my amp? My understanding and experience is that any FBV setting changes are stored within the software or amp you are using, not the FBV itself (such as Pod Farm, FBV Control Application, etc..). When you reconnect the FBV back to the SV, it will get it's instructions from the programmed patches in the SV, and operate accordingly and 'work as before'. Quote Link to comment Share on other sites More sharing options...
fflbrgst Posted October 29, 2015 Share Posted October 29, 2015 Napynap is correct. The patches are saved in the amp or Podfarm, not in the FBV, which is basically is just a switchbox. Quote Link to comment Share on other sites More sharing options...
AntonisPat Posted October 29, 2015 Author Share Posted October 29, 2015 Thank you both for your help. Could you also tell me where I could find the POD Farm 2-Shortboard.fbv mentioned in the manual? For the life of me, I've searched the entire Line6 support site but cannot find it.. Quote Link to comment Share on other sites More sharing options...
fflbrgst Posted October 30, 2015 Share Posted October 30, 2015 http://line6.com/footcontrollers/fbvshortboardmkii.html Quote Link to comment Share on other sites More sharing options...
AntonisPat Posted November 4, 2015 Author Share Posted November 4, 2015 I feel kinda stupid now but I still cant find it. I follow your link, go to Software downloads through there and it redirects me to the software download page, From there I select FBV Shortboard MK II / all software / win7 and all I can find is the Line6 Monkey updates. The "Learn more about how FBV Shortboard MkII can send MIDI via USB" redirects me to the manuals. What am I doing wrong? Quote Link to comment Share on other sites More sharing options...
fflbrgst Posted November 4, 2015 Share Posted November 4, 2015 The link is to the product page for the Shortboard! That's what you asked about. What are you looking for? The manual is here: http://line6.com/support/manuals/fbvsmkii Quote Link to comment Share on other sites More sharing options...
AntonisPat Posted November 4, 2015 Author Share Posted November 4, 2015 Quote from the FMV manual: “POD Farm 2†FBV MkII Control Presets To provide a nice “jump start,†we’ve created “POD Farm 2†FBV MkII control presets that can be loaded on your device using the Line 6 FBV Control application. These FBV MkII control (.fbv file) presets load a complete set of MIDI commands on your device for instant POD Farm 2 functionality! It is recommended that you download and load the FBV control preset on your FBV MkII device before proceeding with configuring the POD Farm 2 standalone application or Plug-In for your FBV MkII device. These Presets are available for download from the POD Farm Online Help site: • For FBV Shortboard MkII - Download the file named “POD Farm 2-Shortboard.fbv.†• For FBV Express MkII - Download the file named “POD Farm 2-Express.fbv.†I'm trying to find where I can download thes two presets from. I've had no luck from the software downloads section or anywhere else in the line6 site. If possible please explain step by step what i need to do and not just a link because I've had no luck with links so far.. thanks in advance! Quote Link to comment Share on other sites More sharing options...
AntonisPat Posted November 16, 2015 Author Share Posted November 16, 2015 Hi guys ..still no luck with this. I gotta say, its getting pretty annoying to have the stuff needed and not being able to use it..not blaiming the equipment but I still haven't found a way to make it do what its supposed to do.. please help! Thanks! Quote Link to comment Share on other sites More sharing options...
d0gmA Posted November 16, 2015 Share Posted November 16, 2015 The preset you are looking for is included in the latest "Line 6 FBV Control v1.04 Installer.exe" When you install the FBV Control drivers and editor it installs the presets in the LIne 6 folder in your My Documents area. Quote Link to comment Share on other sites More sharing options...
AntonisPat Posted November 18, 2015 Author Share Posted November 18, 2015 The preset you are looking for is included in the latest "Line 6 FBV Control v1.04 Installer.exe" When you install the FBV Control drivers and editor it installs the presets in the LIne 6 folder in your My Documents area. Thank you d0gmA!! I cant believe I've searched everywhere only to find it was already downloaded.. THANK YOU! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.