DavidBurt Posted February 24, 2016 Share Posted February 24, 2016 I notice that among the custom IR' s on the HelixDepot site is one for a Kemper cab. What exactly is this and how do I use it with Helix patches. Quote Link to comment Share on other sites More sharing options...
jaminjimlp Posted February 25, 2016 Share Posted February 25, 2016 Load the helix app on your computer if you haven't already, go to impulses, drag-and-drop that IR on to the helix app at whatever position that you want to put it in one of your presets and a block and go to IR cabs and load the IR block then when you select the IR block you will see that you can select which are or will be used in the preset do not use the cab block with an amp but use IR block and you will see the difference... we have put some links out before for free IR's that were found around the web and if you search I'm sure you will find it I will put a link from my dropbox here. so you can see there are several on there that you may try. But with the due diligence you can do a lot of adjusting to the Helix cabs that are already on it because of Mic position and other settings. https://www.dropbox.com/sh/m19ymuuus8qid7d/AACLHcDWpEUZsUF54GLom6Xua?dl=0 1 Quote Link to comment Share on other sites More sharing options...
DavidBurt Posted February 26, 2016 Author Share Posted February 26, 2016 Thanks Jaminjimlp. I know how to use third party IR's with the Helix (I have used Ownhammer etc.). My question is that normally IR's relate to a cab and mic. Kemper is not a cab so what is a Kemper cab IR? No specific cab is indicated in the description. Quote Link to comment Share on other sites More sharing options...
jaminjimlp Posted February 26, 2016 Share Posted February 26, 2016 I don't know what cab it is supposed to be but it was made with a kemper and sounds better that most I have heard. Quote Link to comment Share on other sites More sharing options...
DavidBurt Posted February 26, 2016 Author Share Posted February 26, 2016 Thanks Laminjimlp. I'll test it out and see. I've heard that the Kemper profiles are excellent. It would be great if Kemper patches could be loaded into the Helix. Does anyone know if they are compatible? I think it would be a great joint partnership........but I won't hold my breath! Quote Link to comment Share on other sites More sharing options...
BrownNote71 Posted February 26, 2016 Share Posted February 26, 2016 Kemper did made some cabs as a fun side project. They had them at NAMM. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.