Jump to content

jaminjimlp

Members
  • Content Count

    498
  • Joined

  • Last visited

  • Days Won

    1

Everything posted by jaminjimlp

  1. I noticed before updating the Helix floor firmware that part of the instructions said if you wanted to use the new templates and Factory presets to back up your set list separately, so dose this mean that when a full back up is created with some previous firmware that the templates and factory presets are backed up as well and after a successful firmware update and preset reset/rebuild (power on holding stomp buttons 7 and 8 ) that when I do a restore from the backup done before firmware update that the new template and factory 1 and 2 will be restored to the backup's Templates, factory 1 and 2 set list's??? And if this is true the only way to get the global settings the way I had them is to back up the new firmware Factory 1 and 2 and templates set lists before restoring the full back up and then restore the set list after the full restore is done? wow hope that don't confuse you ... LOL but I tried to get it down the best way I could... I also noticed that one set of update instructions says use you current HX edit to do the back ups before firmware is installed and an other set of instructions says to to down load the new HX edidtor and then do the backup before installing the update?!?!?! anyone else see this? LOL
  2. just register it!!! thats it
  3. You should be able to make three separate paths make the input on each path separate like guitar on first path then microphone on second path and then auxiliary input on a third path all of them out putting to Main.... Should even be able do a 4th path with a variax with a vdi cable And be able to balance the volume of each with the output on its path
  4. Awesome bro!!! sounds good so far... my fav amp so far is the Arktype dist channel.... you mess whit that one any yet?
  5. I sent you an email about my 11r dropbox link.... it doesn't work any more.
  6. Glad to see ya here bro!!! Looking forward to see what you can do with it... and as a 11r pack customer I think you need to do some packs with different types of music styles and a lifetime package as well... Your time is worth something... You still including all platforms in the Supperpack?!?!?! LOL :D ;) it's ok if you don't I don't mind contributing! BTW "My Boy Blue" was one of my goto presets for the 11r!!! Oh and do you still make custom presets??? I would like those Frank Marino presets for Helix too.
  7. I strap my helix on my Back and base jump with it!!! Makes me feel alive! :lol:
  8. You should try some of Glen Delaune's https://www.glenndelaune.com/patch%20downloads.htm patches... may save you some time. It took me a wile to get the tones I have now and his patches made me look at things quite different from before i saw his. I guess mostly I was looking at things like you would in the real world of amps and FX and in Helix you can do things that would not work at all in the real world like putting a volume peddle after the cab...
  9. https://www.dropbox.com/s/noxtz195xzhi7vf/LoudnCleaner%20PRS.hlx?dl=0 try that one .... I will have to get you a more updated one soon ... haven't updated and saved my presets in a wile .... I use the snapshots part not the individual fx part and i use 2 EXP's #3 being the volume peddle for all paths. I also use a JTV-89F so the guitar model changes with the snapshots as well... let me know what you think good and bad... sorry for making you wait so long I have had a lot going on.
  10. The neck is a big deal for me as well.... I have a JTV 89F and it has a (what someone else described as the) "shredder neck" I love it I can't even play well with a LesPaul, PRS, fat neck (great guitars) but to me its like playing a cucumber... LOL if someone who has both could elaborate on this it would be great..
  11. I lost a buch of snapshots on a few presets wile switching to the 2.11 FW and didn't have a back up for them.... aaaaaarrggg!!!
  12. I got the big box set from Redwires too because I wanted the IRMIX2 plug in to mix IR's It is well worth it... here is how it works I use PT but that don't mater, load up a session create a track load the IRMIX2 plugin to the track put a helix preset on and remove the cab or turn it off add a Looper block to the front of your preset path record a rhythm lead or what ever and set down the guitar and hit play... now start loading up IR's to IRMIX2 and throw as many at it you want remove one add two ect... find something good just save it and load it to the Helix IR list and it sounds exactly how you made it... https://www.dropbox.com/s/zqe6sfla34v6fjg/GHK.wav?dl=0 that is my fav that i made with all kinds of free IR's from around the web. I have a few Ownhammer packs as well but all thats been said before me I agree with as well... I like the one I made better than each of them but you might hate it... LOL
  13. This is the correct way to do this.... I have been using this for nearly a year now. (used to use 2 volume blocks and controlled them with the exp) some of my presets have 3 and 4 separate paths, though my current fav I started to experiment with using the master volume on each amp in each path and changing the volume from 0 - whatever I need for that amp wile the other 2 amps in the preset go to 0.... you need to think outside the box (not in the real world way you did with real amps and FX) and you will be surprised what the Helix can actually do. One thing I started to do a wile back was use a volume block at the end of my path with the EXP instead of at the beginning so I could have distorted over driven goodness at very low volumes when the rest of the band was playing softly. I learned allot from looking at what others had done on there presets like Glen D. he opened up a few ideas for me last year. When I say separate paths I mean SEPARATE from beginning to end no A/B splits at all, some inputs of paths use variax mag some use multi some use just variax and all the outputs got to multi or all. Example of three separate paths: path input 1A to output, path input 1B to output, path input 2A to input 2B to output.
  14. here is the amp names http://helixhelp.com/pmwiki.php?n=Main.Amps
  15. Okay so any of you with the problem did you get yours in the initial shipment of the helix or are these all Second Run
  16. jaminjimlp

    Rubber feet

    Anyone else have the rubber feet tearing or coming off? What are some of your solutions. I tried crazy glue but that doesn't last.
  17. I thought the same thing, mine also squeaked (posted a video on it) I took the bottom off and backed out the tension Bolt and used some of the lube from the other parts of it and spread it around and it never made any noise again. Realy if you took the spout of a wd40 can and put the peddle in the toe down position insert it in the case opening underneath the foot part and shoot the pivot piont there you would not have to take off the bottom... I was convinced it was rubbing the case, I could see it... but the noise is from the pivot point. I think it is an assembly error on the part of the young oriental children at the factory. LoL just kidding about the children.
  18. How about an mxr Distortion plus probably the smoothest or for lack of a better description cleanest sounding distortion but always had to use it with an EQ after it. And also the mxr full-bore metal that pedal sounds so good with a totally clean transistor amp you can get the crunchiest metal tone you ever heard with it using a clean transistor amp, that's right I found a unicord stage 400 210 amp on the side of the road and put two Jensen mod speakers in it and had one bad transistor it is a super clean amp not really usable for me except for when I plug in that mxr full-bore Distortion in front of it then it sounds like a serious metal rig.
  19. I tend to gravitate towards the ribbon mics and the condenser mics... And I have bought plenty of IR's but have found that really there's only about three or four that tend to be the go-to ones. One of them being that free one that someone made on a kemper supposedly and are in the folder of that free IR's link that I posted in the past
  20. You need to make sure that your USB is not going to sleep or powering down when not in use to save power
  21. Pretty sure you can't do that but you can copy and paste blocks Just use the editor and remember to save each time you change presets to go back and copy the next part.... I had to do this before
  22. Hey you forgot to complain about the tuner and the time it takes to switch between presets.... LOL Oh yeah almost forgot to mention I nailed that tone last week and you can buy it for the low low price of 3 easy payments of $49.99... Wait but that's not all you get the "Pick Hand" if your one of the first 100 callers. Yes that's right I will send you my pick hand absolutely free as a bonus when you buy this preset.... but wait there's even more... I'lll include the stray cat, no its not another preset it this cat that has been hanging out at my house and spraying my front door... that's right you get all this for.......
×
×
  • Create New...