HelioJunior1906 Posted May 12, 2016 Share Posted May 12, 2016 Hi people! I have a HD 400 for about a year now, and it began to act... strange... What is going on is: There are a few buttons that just doesnt work or work as it where another button The "Bank Up" when is pressed act's as if the "Bank Down" imediatly after it, and the bank just does not go up (Some times it goes Donw 1 bank :0 ) The FX Only button isn't working, when I press it the POD enters the save mode, as if I had pressed the save button, the save button is working fine The LEFT button (Close to the presets Knob) doesn't go left, sometimes it just doesn't move anything or goes to the RIGHT! The last thing is the "C" bank Footswitch doesn't move to the C bank, when pressed once the POD alternates between the B, C and then stops at the D bank, if you press it an keep it pressed the POD enters the Tunner, the Tunner Footswitch work's just fine... And some times it all happens... Very rarelly I power down the POD and then power it up and everything is solved, very rare... Will this be a hardware problem? Can it be fixed? Or my POD is moving to it's last days in earth? :( Quote Link to comment Share on other sites More sharing options...
alushemo Posted May 16, 2016 Share Posted May 16, 2016 i have the same problem since 2 years ago, and i cant fixed yet. if you know something let me know please Quote Link to comment Share on other sites More sharing options...
buciutaandrei Posted May 17, 2016 Share Posted May 17, 2016 I have this problem too, 2 years since it begun, no fix. Hope you will find something. Quote Link to comment Share on other sites More sharing options...
silverhead Posted May 17, 2016 Share Posted May 17, 2016 I suggest each of you open a support ticket to work directly with Line 6 tech support on your problem. Quote Link to comment Share on other sites More sharing options...
meduz Posted May 31, 2016 Share Posted May 31, 2016 could you tell me if the problem is solved ?? "" The LEFT button (Close to the presets Knob) doesn't go left, sometimes it just doesn't move anything or goes to the RIGHT! The last thing is the "C" bank Footswitch doesn't move to the C bank, when pressed once the POD alternates between the B, C and then stops at the D bank, if you press it an keep it pressed the POD enters the Tunner, the Tunner Footswitch work's just fine... And some times it all happens... Very rarelly I power down the POD and then power it up and everything is solved, very rare... "" i ve got similar problem on the HD500... i opened support ticket but my problem is run always actualy... thanks Quote Link to comment Share on other sites More sharing options...
meduz Posted June 23, 2016 Share Posted June 23, 2016 I finally solved my problems.I unsettled everything and coated the printed circuit as well as the buttons of navigation with a cleaner contact...go in test mode to verify everything / expression pedal calibration and put back the lastest firmware another time. waiting few minutes and all works good !!! i think it was a problem with the nav buttons (left) wich put the pod in RAZ mode each time of ignition... my warranty was down so DO NOT the same thing if your warranty is OK. Quote Link to comment Share on other sites More sharing options...
pravinspace Posted February 18, 2022 Share Posted February 18, 2022 (edited) Could you go into detail how you solved it? I have a problem when i try to press on Bank A it seems to me it’s not working, B, C, D are working but when i press A nothing seems to happe Edited February 18, 2022 by pravinspace Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.