pamisano Posted June 16, 2016 Share Posted June 16, 2016 So I normally use an Atomic Wedge (powered) with my Helix. I recently plugged into my ISP Stealth power amp and JetCity 2x12 and almost every preset now has this obnoxious high pitched squeal. Any ideas what would be causing that? Thanks, Pete Quote Link to comment Share on other sites More sharing options...
jpdennis Posted June 16, 2016 Share Posted June 16, 2016 So I normally use an Atomic Wedge (powered) with my Helix. I recently plugged into my ISP Stealth power amp and JetCity 2x12 and almost every preset now has this obnoxious high pitched squeal. Any ideas what would be causing that? Have you adjusted high and low cut on your blocks? I had issues with the sharp sound of my presets until it was pointed out to check the frequency range of the speakers I like the most with my real amps. I found that to be 80Hz to 5K (or even 5.5K)Hz so I started cutting the High and Low at that range and it worked out best. In some cases I even cut the highs to 4.5K-4.7K Hz Dennis PS: Here is the link to the thread I had asked a question about that led me to that thought http://line6.com/support/topic/20693-pick-noise-why/ Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.