loopmasta Posted September 23, 2016 Share Posted September 23, 2016 My Amplifi30 is not working properly. It keeps flashing all 4 tone leds and the remote app tells me to update the firmware. But there is none. The line6 updater and the remote app states that there is no update available. What can i do to fix my amp? Any help is welcome. Amplifi30, Device Flash Version 2.50, Amplifi remote 2.60.1 Quote Link to comment Share on other sites More sharing options...
jpayant1 Posted September 25, 2016 Share Posted September 25, 2016 I have the exact same issue with my Amplifi TT this morning. Using USB on my Mac Mini and the Line6 updater, I have tried to re-apply the 2.50.2 firmware update and still didn't work. I just downgraded back to the 2.10 firmware. At first looked like it was working, but when I took it over to my rig, did the same thing. Trying it again by holding [tone] and [tap] while powering on to force it to update mode... Quote Link to comment Share on other sites More sharing options...
jpayant1 Posted September 25, 2016 Share Posted September 25, 2016 I've tried to update every way available (except through the android app, as I cannot communicate via bluetooth with the unit. So.. it's a brick. I'm contacting tech support. If they can't fix, I'll be a very unhappy (former) Line 6 customer. Quote Link to comment Share on other sites More sharing options...
loopmasta Posted September 25, 2016 Author Share Posted September 25, 2016 Hi jpayant1, i contacted tech support too but no feedback so far. Please let me know if you find a solution. Quote Link to comment Share on other sites More sharing options...
Jg625 Posted September 26, 2016 Share Posted September 26, 2016 Having the same problem. Quote Link to comment Share on other sites More sharing options...
Triryche Posted September 26, 2016 Share Posted September 26, 2016 If you have not already, please see this article from the Knowledge Base. http://line6.com/support/page/kb/_/amplifi-products/ampl/4-tone-lights-flashing-on-amplifi-3075150tt-r713 Also, if it was not previously on a firmware that supports Andriod, the only way to update via Bluetooth is with an iOS device. Quote Link to comment Share on other sites More sharing options...
loopmasta Posted September 26, 2016 Author Share Posted September 26, 2016 Thanks to Line 6 Customer Service my amp is working again. Deleting / re-installing the app from / to my IOS device plus resetting the Amplifi30 (press and hold volume and tone during power-up) did the trick. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.