Diablo1 Posted December 30, 2016 Share Posted December 30, 2016 How do I delete effects in the view window of the hd 500x, I can move it disable it but can't figure out how to delete effects? I read the directions for the software but can't delete the effects or amps picked on the hd 500x software, it says put the cursor over the effect and a drop down triangle pops up but if I go to hit the pull down arrow nothing's opens up, how do you delete effects? I'd like to change then in both the software and in view window on the unit Quote Link to comment Share on other sites More sharing options...
silverhead Posted December 30, 2016 Share Posted December 30, 2016 On the device itself, use the navy key to select the desired amp/FX block in the signal flow view. Then use Knob 1 to select None as the model type. In the editor software, do essentially the same thing. Select the block with your cursor and then select None in the menu. Quote Link to comment Share on other sites More sharing options...
Diablo1 Posted December 30, 2016 Author Share Posted December 30, 2016 Is the menu one of the tabs on the top when file tab is? Thanks Quote Link to comment Share on other sites More sharing options...
silverhead Posted December 30, 2016 Share Posted December 30, 2016 No. The menu I am referring to is the drop-down FX-Type menu at the right side of each of the FX edit windows in the FX page of the HD500 Edit program. When you put your cursor over the downward-pointing triangle a menu should pop up. One of the menu selections is None. Quote Link to comment Share on other sites More sharing options...
Diablo1 Posted December 30, 2016 Author Share Posted December 30, 2016 I get that when I put the cursor over the effects, but when I click on it the drop down pointed downward arrow, it doesn't drop down a menu so no choices to choose from Quote Link to comment Share on other sites More sharing options...
silverhead Posted December 30, 2016 Share Posted December 30, 2016 You may have to click the mouse. If the menu still doesn't appear try reinstalling the edit program. Quote Link to comment Share on other sites More sharing options...
Diablo1 Posted December 30, 2016 Author Share Posted December 30, 2016 How do you start a new preset from scratch without modifying the presets that are already on the hd 500x, , how do you start your own blank preset from scratch? Quote Link to comment Share on other sites More sharing options...
silverhead Posted December 30, 2016 Share Posted December 30, 2016 The HD500 organizes presets into 'Setlists'. There are 8 setlists, and the factory installed firmware includes 2 (or 3?) setlists of factory presets. The remaining 6 setlists are named User1, User2, etc. Each of these setlists are filled with blank/empty presets. You can select any one of these setlists and use any one of the empty presets as your starting point for building your own preset. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.