ghigo79 Posted January 24, 2017 Share Posted January 24, 2017 Hi, I have a problem with the tuner of my Firehawk. The tuner is unstable. the Firehawk suddenly returns to the patch without push any button and so it's impossible use the tuner. Could you help me? Has somebody found this problem? Quote Link to comment Share on other sites More sharing options...
richardstehle Posted January 25, 2017 Share Posted January 25, 2017 Hi, I have the same problem with my FH. Reported to the support of Line 6. But got only some standard answers like "reconnect to the FH" or "try with another device". No solution so far. I would be interested in real solutions. Quote Link to comment Share on other sites More sharing options...
mcbeddall Posted January 25, 2017 Share Posted January 25, 2017 Does it work without being connected to the app? Quote Link to comment Share on other sites More sharing options...
ghigo79 Posted January 25, 2017 Author Share Posted January 25, 2017 No. I have the same problem also without Bluetooth connection Quote Link to comment Share on other sites More sharing options...
mcbeddall Posted January 25, 2017 Share Posted January 25, 2017 Does it always return to the patch you used last ? Or does it always return to a particular patch ? (Always patch 1 for example) I'm just wondering if it might be something mechanical like a stuck switch Quote Link to comment Share on other sites More sharing options...
ghigo79 Posted January 25, 2017 Author Share Posted January 25, 2017 Yes, it returns to the last used patch. Sometimes also after few seconds. Quote Link to comment Share on other sites More sharing options...
mcbeddall Posted January 25, 2017 Share Posted January 25, 2017 Probably not a stuck button then, Have you tried restoring the factory settings? Sounds like a pain because it is a pain but I think it's your best option. Make sure you have any tones you use to either the cloud or "my tones" in the app Quote Link to comment Share on other sites More sharing options...
ghigo79 Posted January 25, 2017 Author Share Posted January 25, 2017 I have already reset to the factory settings but nothing is changed. If i don't find a solution i will give it to the store and bye bye line6. Quote Link to comment Share on other sites More sharing options...
mcbeddall Posted January 25, 2017 Share Posted January 25, 2017 OK so the only other option before returning it is to open a support ticket here with line6. Although if your retailer will exchange it for a new one I'd say that's definitely worthwhile before giving up as the problem you have certainly isn't present on every firehawk, I regularly leave mine in tuner mode to prevent feedback while I'm away doing other more boring stuff, sometimes for hours at a time Quote Link to comment Share on other sites More sharing options...
gmwelker Posted July 23, 2022 Share Posted July 23, 2022 This just started happening to me recently. It makes me sad seeing now answer on a thread this old. I also have the added issue where my delay mix % will keep reseting its value to wherever it was left even on a brand new patch. So now it is impossible for me to adjust the delay mix volume on my Firehawk 1500. Kind of a deal breaker. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.