KasperFauerby Posted February 6, 2017 Share Posted February 6, 2017 Hi guys, I'm looking for a small portable backup system for live gigs, in case my main setup breaks down. At first glance the AMPLIFi FX100 looked pretty much perfect for me. I could set up 4 good base presets and have a volume and tuner available. Perfect! The problem then is - I really wanted to connect directly to FoH with cab simulation, which also sending a line level signal to a guitar power amp and cabinet. However, from reading the manual that doesn't seem to be possible? I cannot even connect both to FoH and a guitar amp input at the same time? How do you guys use the FX100 in Live situations? Do you have to rely on a monitor from the PA mix. As an emergency solution - would it be possible to have a mono signal at both L and R channel in main out, then send one mono feed to FoH and one to a guitar power amp? Suggestions very welcome ;) Cheers, Kasper Quote Link to comment Share on other sites More sharing options...
ric1966 Posted February 6, 2017 Share Posted February 6, 2017 I use Firehawk FX for my main rig. As a backup, I have AMPLIFi 100, going from mono XLR out to a small powered monitor, with the monitor's pass thru XLR to FOH. Simple and compact. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.