sb77 Posted February 8, 2018 Share Posted February 8, 2018 Just now I struggled to get the updated firmware on to my Helix and was immediately getting an error generated as the update starts (this leaves a blank screen on Helix requiring a power cycle).This has happened before (2.3) and I believe(d) was attributable to internally shared usb on my laptop. Tried all ports having unplugged any peripherals but there is still internal sharing going on - not that unusual in laptops. Tried different cables , everything.... I then inadvertently made just one additional modification and shutdown an incoming 5 pin MIDI signal (from a rhythm gen) into Helix (tempo LED FS switched from blue to red as you would expect) - next time I tried the update procedure it worked first time. Nothing else changed. Yep, that seems bizarre and perhaps just a coincidence, but keep it in mind if anyone else is having a hard time with the updater starting & failing in a similar manner. Quote Link to comment Share on other sites More sharing options...
jbuhajla Posted February 8, 2018 Share Posted February 8, 2018 I thought I remember somewhere in the update instructions to turn off or unplug midi. I could be wrong though. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.