raiyanhrid17 Posted May 17, 2018 Share Posted May 17, 2018 My pod hd 500 edit used to work just fine before. But i had to re install my windows for a certain hard drive crash, and after that my pod hd 500 is not responding.it works just fine without connecting the pod .But after connecting it ,the pod hd 500 edit is not responding or responding very late.I have tried it on different pc s but the problem persists.Asking for a solution Thanks in advance \m/ Quote Link to comment Share on other sites More sharing options...
raiyanhrid17 Posted May 18, 2018 Author Share Posted May 18, 2018 Just now, hurghanico said: surely reinstalling windows couldn't cause any harm to the POD.. if you have the same identical problem with the POD connected to different PCs, then maybe that the USB cable you are using is faulty, or the POD USB port is broken (is the plastic rectangle still present at its center?) eventually try a global reset (and then a pedal calibration), but be aware that if you do it, the setlist names will revert back to their default _____________________________________________________________________________________________________________________________________________________________ All about POD HD500/X new forum Yes i tried it with a different pc, the problem persists. All the other line 6 softwares work perfectly except the edit. The edit opens but doesn't response.if i press any switches on the pod , the change is seen in the edit so does the tap tempo changes if i set the tempo through the pod. I have done the procedure of global reset by holding the left arrow and plugging in the power cable. It didnt show anything that the pod has been Reset ,just the line 6 logo came up then the first preset came up.I also did the pedal calibration. The usb port seems fine.The pics are given below Thanks hurghanico Please tell me what to do next Best regards \m/ Quote Link to comment Share on other sites More sharing options...
stormstudios Posted May 18, 2018 Share Posted May 18, 2018 did you somehow install an older version of Edit, like from a backup somewhere, and forget to update it to the latest? This does sound like a PC issue, not a Pod issue. Quote Link to comment Share on other sites More sharing options...
raiyanhrid17 Posted May 18, 2018 Author Share Posted May 18, 2018 nope i am using all the updated softwares a,flash , firmware.the same problem persists when I use it on another PC Quote Link to comment Share on other sites More sharing options...
raiyanhrid17 Posted May 18, 2018 Author Share Posted May 18, 2018 yes it was set as my audio interface in my pc and yeah the audio files work good Quote Link to comment Share on other sites More sharing options...
raiyanhrid17 Posted May 18, 2018 Author Share Posted May 18, 2018 i changed the knob way back it was an external repair Could it be a usb cable problem??????? Quote Link to comment Share on other sites More sharing options...
raiyanhrid17 Posted May 19, 2018 Author Share Posted May 19, 2018 Hey everyone the problem was a cable issue it is now fixed thank you everyone for your valueable time Peace ^_^ Quote Link to comment Share on other sites More sharing options...
stormstudios Posted May 19, 2018 Share Posted May 19, 2018 Thanks for the update. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.