Baddum12 Posted August 7, 2018 Share Posted August 7, 2018 Hey All, I am aware that this has been addressed in earlier threads, the problem is that none of the solutions posted there are working for me. Basically, I dug up my old POD XT after more than a decade and was stoked to get the software installed to edit settings on my PC rather than on the unit. I got Line6 Monkey, updated firmware, powered off then back on and saw "Invalid Code Error 02" I immediately came to the forums and attempted the offered solutions: I tried to start up while holding SAVE and EDIT, I tried to start up while holding far left button. Nothing. Is there anything that can be done? I don't mind losing saved presets or anything like that, I just want it to work again. Thank you in advance for any help you can offer. Quote Link to comment Share on other sites More sharing options...
psarkissian Posted August 7, 2018 Share Posted August 7, 2018 Hardware or combination of hardware/firmware. Error 2,... it needs to be serviced by a Line 6 authorized service tech in your area. Quote Link to comment Share on other sites More sharing options...
Baddum12 Posted August 8, 2018 Author Share Posted August 8, 2018 I was afraid that might be the case. Thanks for the response. Does anyone have an idea of how much this will cost me? Quote Link to comment Share on other sites More sharing options...
daveny5 Posted August 8, 2018 Share Posted August 8, 2018 Did you try it again? I recently flashed mine and the first time it didn't work. Quote Link to comment Share on other sites More sharing options...
psarkissian Posted August 8, 2018 Share Posted August 8, 2018 "Does anyone have an idea of how much this will cost me? "--- it's up to the individual shop. Check with the authorized Line 6 service center in your area. For an Error 2, re-Flash won't work. It's a hardware/firmware thing, not user repairable. Quote Link to comment Share on other sites More sharing options...
Baddum12 Posted August 8, 2018 Author Share Posted August 8, 2018 3 hours ago, daveny5 said: Did you try it again? I recently flashed mine and the first time it didn't work. From what I understand (and what psarkissian has provided), this error code is not something we can fix or something that will clear up on its own. The unit needs to be serviced. 1 hour ago, psarkissian said: "Does anyone have an idea of how much this will cost me? "--- it's up to the individual shop. Check with the authorized Line 6 service center in your area. For an Error 2, re-Flash won't work. It's a hardware/firmware thing, not user repairable. Thanks again for your help Quote Link to comment Share on other sites More sharing options...
psarkissian Posted August 8, 2018 Share Posted August 8, 2018 Anytime. Quote Link to comment Share on other sites More sharing options...
daveny5 Posted August 8, 2018 Share Posted August 8, 2018 Most repair shops will give you estimate before performing the repair. Then you can decide if it's worth it. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.