threetle Posted September 2, 2018 Share Posted September 2, 2018 I am not sure if I am doing something wrong. The built in Helix expression pedal is set to EXP2 . How do I get it back to EXP 1? I assumed there was some kind of switch inside but nothing is clicking. Any help would be appreciated. Quote Link to comment Share on other sites More sharing options...
datacommando Posted September 2, 2018 Share Posted September 2, 2018 5 hours ago, threetle said: I am not sure if I am doing something wrong. The built in Helix expression pedal is set to EXP2 . How do I get it back to EXP 1? I assumed there was some kind of switch inside but nothing is clicking. Any help would be appreciated. Hi, Page 6 Helix owners manual: 16. Expression Pedal Move the expression pedal to control volume, wah, or a combination of amp and/or effects parameters. Activate the hidden toe switch to toggle between EXP 1 and EXP 2. (The scribble strip above tells you which one is active.) If an external pedal is connected to the rear panel EXP 2 jack, the built-in pedal becomes EXP 1 only. What they don’t tell you how difficult it is to get the switch to engage. You need to have the Helix on the floor a press down on the toe end of the pedal. Some users have found that using the supplied hex key tool, loosening the pedal a little may help. Note: If you have a volume or pan block in your preset it will be auto assigned to EXP2, likewise if you add a wah or pitch shift pedal, that will be on EXP1. Hope this helps. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.