afc1903 Posted September 19, 2018 Share Posted September 19, 2018 I'm trying to set the volume pedal so that it's at 50% at heel up and 100% at toe. I'm trying to do this by having the pedal at heel, changing the parameter to 60%, then saving the change, however it as soon as I press the pedal down and then back up it reverts to 100%. I've tried a few patches and same thing on each patch. I've tried changing the global settings to 'Global' for Expression pedal 2 (I use 1 for wah). I'm assuming this a faulty, and have already had my original unit replaced due to the volume pedal packing in (although that was the hardware). I'd be grateful for any advice In case I'm missing something. Quote Link to comment Share on other sites More sharing options...
brue58ski Posted September 19, 2018 Share Posted September 19, 2018 There are two parameters in there to set the min and max to which I am assuming is now at 0% min and 100% max.You don't just set the min and max with the actual pedal. You have to change and then save that actual parameter. No pedal involved. Quote Link to comment Share on other sites More sharing options...
afc1903 Posted September 20, 2018 Author Share Posted September 20, 2018 Thanks for the reply - how do you set min and max? The only parameter I have is 'position' and I assumed that by choosing 60%, the pedal would get from 60 -100% volume. I can't see where or how to set a minimum or maximum level? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.