
Dt25 Low Volume Position I Louder Than Low Volume Off
By
guitarmech111, in DT50 / DT25
Recommended Posts
mqueluz 3
It happened the same to me this weekend. I guess it's a bad tube...
greghall 77
I have just noticed that when I have low volume option on and amp position I selected, that volume is louder than when I have the low volume option off.
I don't think that is normal. All the other amp positions work as expected with the low volume on/off options. I have a dream rig setup, but this is with a strat plugged straight in.
I have the 2.0 firmware. I have done a factory reset with no change.
Thoughts?
Actually that's normal (or it always has been with my DT25 anyway) - and it depends on where the master, channel volume and gain are set.
Low volume mode isn't a volume control as such, it switches in power amp modelling so that you can turn the amp down and still get a good tone. Position (topology) 1 is the quietest of the 4 topologies in full power mode, so this 'effect' is most noticeable on that one.
I have just noticed that when I have low volume option on and amp position I selected, that volume is louder than when I have the low volume option off.
I don't think that is normal. All the other amp positions work as expected with the low volume on/off options. I have a dream rig setup, but this is with a strat plugged straight in.
I have the 2.0 firmware. I have done a factory reset with no change.
Thoughts?
Share this post
Link to post
Share on other sites