marcverlinden Posted February 3, 2019 Share Posted February 3, 2019 Hi there, The powercab manual says that you need to "set the POD HD device to +4 dB" when connecting to the Powercab. Does anybody know how this is done please ? I choose output mode "studio/direct" on the POD and is sounds OK to me. Thanks ! Quote Link to comment Share on other sites More sharing options...
J_V_RO Posted February 5, 2019 Share Posted February 5, 2019 Maybe switch to "LINE" the 1/4 Out? this is located in the front of your POD. (Edited) Quote Link to comment Share on other sites More sharing options...
codamedia Posted February 6, 2019 Share Posted February 6, 2019 +4db is pro Line Level (-10db is consumer Line Level). As stated above, set the 1/4" outputs to LINE with the switch on the top of the unit. Quote Link to comment Share on other sites More sharing options...
marcverlinden Posted February 8, 2019 Author Share Posted February 8, 2019 Hi guys , I will try this, thank you very much ! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.