rd2rk Posted May 9, 2019 Share Posted May 9, 2019 I put these together for someone over on the Yahoo FCB1010_UNO board who wants to use his FCB/UNO with his Stomp. The file is for use with the UNO_ControlCenter Editor. It's not so much a "do it this way" as a "this is how to do it" Demo. In fact, if I were going to use it (I have the Helix Floor, so no need) I WOULDN'T do it that way, It's set up simply to demo how to use the FCB/UNO to control the various Stomp functions. The FCB/UNO is not an ideal (infinitely flexible) MIDI Controller, as a look at the notes file I included makes apparent, but it'll get the job done if you work out a division of labor betweem the Stomp and the FCB/UNO that suits your needs. The other sysex I made for someone (here?) who wanted to use the FCB/UNO with a Helix Rack. Again, it simply demonstrates how to do various things. Hope these help someone! Helix Snaps Banks and Stomps.lgp HXStomp Demo.lgp HXStomp DEMO sysex Instructions.txt Quote Link to comment Share on other sites More sharing options...
gkieffer94 Posted November 20, 2019 Share Posted November 20, 2019 Thank you very much, it was very useful especially for the #CC numbers that are not reserved. I still had an error message when I assigned a #CC for an action from the FCB1010. I find the documentation a little "light" about precisely these ranges of #CC attributed. Thanks again. P.S: sorry for my bad english Quote Link to comment Share on other sites More sharing options...
rd2rk Posted November 20, 2019 Author Share Posted November 20, 2019 7 hours ago, gkieffer94 said: Thank you very much, it was very useful especially for the #CC numbers that are not reserved. I still had an error message when I assigned a #CC for an action from the FCB1010. I find the documentation a little "light" about precisely these ranges of #CC attributed. Reserved CC#s are only going to cause a problem if you use those that are clearly defined in the Helix manual, or if you have other devices such as synths in your MIDI chain that aren't properly assigned to different MIDI channels than the Helix. If you're more specific about the problem you encountered I can try to help. The CC#s that I used in the attached files should not cause any problems. If they do, I want to know about it! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.