Keybi Posted May 9, 2019 Share Posted May 9, 2019 Hello, Is there a reason why the HX*s Looper Block sends out MIDI CC? And is possible to deactivate this? Because my AMP reacts on those CC's. Whenever I start to record or overdub, my AMP's Boost gets activated. Quote Link to comment Share on other sites More sharing options...
rd2rk Posted May 9, 2019 Share Posted May 9, 2019 Actually, I'm pretty sure that while you can stop it from sending over USB, The DIN jacks always send. Also, that would be a problem if you WANT to send MIDI, just not CC#61. That CC# is ALWAYS going to send on the HX BASE Channel. If you use Command Center to send MIDI, just remember to set a different channel, and set your AMP and other MIDI devices to that channel, NOT the BASE Channel. Quote Link to comment Share on other sites More sharing options...
Keybi Posted May 9, 2019 Author Share Posted May 9, 2019 10 minutes ago, rd2rk said: Actually, I'm pretty sure that while you can stop it from sending over USB, The DIN jacks always send. Also, that would be a problem if you WANT to send MIDI, just not CC#61. That CC# is ALWAYS going to send on the HX BASE Channel. If you use Command Center to send MIDI, just remember to set a different channel, and set your AMP and other MIDI devices to that channel, NOT the BASE Channel. The AMP's Midi setting can't be changed. It is fixed. It needs PC on Midi Channel 1. But it also receives CC on channel1. So I try to use Command Center and change Base Channel. ;-) THX Quote Link to comment Share on other sites More sharing options...
rd2rk Posted May 9, 2019 Share Posted May 9, 2019 That'll work! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.