kimyesik Posted July 25, 2019 Share Posted July 25, 2019 I updated to 2.8. If ir data is loaded in the ir block, hum noise will occur. It is a 60Hz hum noise. Quote Link to comment Share on other sites More sharing options...
Makron Posted July 25, 2019 Share Posted July 25, 2019 I have the same issue with pasive pickups (dimarzio, Seymour Duncan and other 3 guitars). Active emgs not have hum. Quote Link to comment Share on other sites More sharing options...
kimyesik Posted July 25, 2019 Author Share Posted July 25, 2019 I cleaned the contacts of the usb cable last night. And helix 2.8 update was successful. The helix's ir block noise was gone, and other minor bugs were not bugs, but the global settings were initialized. Quote Link to comment Share on other sites More sharing options...
meason54 Posted July 26, 2019 Share Posted July 26, 2019 Also getting the same hum. Never had this problem with 2.71 or any other version. Quote Link to comment Share on other sites More sharing options...
guitarman2ukabl9 Posted October 4, 2019 Share Posted October 4, 2019 Same here, just started during a rehearsal on clean amps mainly, anyone have any thoughts? Quote Link to comment Share on other sites More sharing options...
billybremner Posted October 11, 2019 Share Posted October 11, 2019 I don't know whether it's the same problem but my presets with the Litigator amp developed a loud hum post update. I tracked it down to the ripple parameter which I had set at 8. I turned it down to 5 and it removed most of it but you can still hear it especially at high volumes. Quote Link to comment Share on other sites More sharing options...
kimyesik Posted August 4, 2020 Author Share Posted August 4, 2020 Some time ago, I found that if you reduce "RIPPLE", hum noise disappears. Quote Link to comment Share on other sites More sharing options...
Makron Posted August 8, 2020 Share Posted August 8, 2020 On 7/25/2019 at 10:02 AM, Makron said: I have the same issue with pasive pickups (dimarzio, Seymour Duncan and other 3 guitars). Active emgs not have hum. Same here, hum noise with pasive pickups, dimarzio evos N and B (with cooper shield), dimarzio crunch lab, dimarzio d activator X, and others seymoud duncans. All pasive pickups have noise hum. EMG 81, 85, 60, 60A, 89 without hum. My helix LT has upgrade fw 2.80 -> 2.82 -> 2.90 -> 2.91 ->2.92 all new fw versions have HUM previous version 2.70: not have hum GROUND - LIFT XLR button is not working too obviously have correct ground from power cord and tested. with others pedals (hd500x, zoom g5 or direct to amp) not have hum in passive pickups with same power cord. Quote Link to comment Share on other sites More sharing options...
Makron Posted August 15, 2020 Share Posted August 15, 2020 Anyone else with this same problem? I'm going to upload a example video, hopefully they can solve it Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.