ErikWasser Posted November 9, 2019 Share Posted November 9, 2019 Hello I am trying to connect an older pedal which only has a single input, but two outputs (Left: Mono Both: stereo). Can I send one mono signal out to the pedal from the Helix Floor but have it returned in stereo? Thanks! Quote Link to comment Share on other sites More sharing options...
Peter Posted November 9, 2019 Share Posted November 9, 2019 Yes, you can use a mono send block and a stereo return block. Quote Link to comment Share on other sites More sharing options...
ErikWasser Posted November 10, 2019 Author Share Posted November 10, 2019 Thank you for the response. I did try that but I’m only getting the left signal when hooking it up like that with a mono send and stereo return. Having already checked all the cables and the pedal itself for error there must be something in the Helix I’m to dumb to understand. Quote Link to comment Share on other sites More sharing options...
Peter Posted November 10, 2019 Share Posted November 10, 2019 9 minutes ago, ErikWasser said: Thank you for the response. I did try that but I’m only getting the left signal when hooking it up like that with a mono send and stereo return. Having already checked all the cables and the pedal itself for error there must be something in the Helix I’m to dumb to understand. Do you use the correct inputs for the stereo return? (return 1 + 2 or return 3 + 4). Have you test it in a new preset? Quote Link to comment Share on other sites More sharing options...
ErikWasser Posted November 10, 2019 Author Share Posted November 10, 2019 Send from 1 and return 1+2. Also tried changing and switching the cables to 3+4, but no difference. Again, thanks for helping out! Quote Link to comment Share on other sites More sharing options...
ErikWasser Posted November 10, 2019 Author Share Posted November 10, 2019 And yes, I tried it in a completely blank preset. Quote Link to comment Share on other sites More sharing options...
Peter Posted November 10, 2019 Share Posted November 10, 2019 strange, if the pedal and the cables are OK this should work :/ Quote Link to comment Share on other sites More sharing options...
ErikWasser Posted November 10, 2019 Author Share Posted November 10, 2019 So I switched out the pedal with another one, and it works. Seems my old UD Stomp has started showing its age acting strangely. Anyways, it was helpful to know I had hooked it up correctly, so thanks! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.