castingflame Posted February 19, 2020 Share Posted February 19, 2020 He there I am brand new to this Stomp and Helix but I have read the manual several times but I am still stuck. I have a Helix HX Stomp that I just updated to the latest 2.82 firmware. I am struggling to make a Snapshot save assigned to a footswitch. Setup I have a little Mosky dual momentary switch unit plugged in that I have setup assigned to switch the Presets up and down. this is working fine. I have my display setup so It is displaying the snapshots and each button and I can chose snapshot 1 2 or 3 on the 3 foot switches. I have also checked that Global Settings | Preferences | Snapshot Edits is set to Recall Problem Using HX edit, anything I do I see reflected in the Stomp. I change to Snapshot 2 in HX edit and the second foot switch lights up. I change the 'Drive' value on Stupor OD on the current preset, see it reflected in the pedal but if I switch back to Snapshot 1 that change goes with me. How do I make a change in Preset 2, save it then leave Preset 1 alone (or something equivalent). I am obviously doing something wrong and missing something silly. Please Help! Kind Regards Paul Quote Link to comment Share on other sites More sharing options...
rd2rk Posted February 19, 2020 Share Posted February 19, 2020 If you DON"T want a parameter change in a Snapshot to "follow" to a different Snapshot, then the Global Snapshot Edit setting should be DISCARD. If you want a Snapshot Edit to be permanently SAVED to that Snapshot, you need to assign that parameter to SNAPSHOTS. The parameter value will be white and in parenthesis. You then make the change and SAVE the Snapshot. If the Global Snapshot Edit setting is RECALL, once you've assigned a parameter to SNAPSHOTS you can set it for all your Snapshots, check your settings by switching Snapshots, then return to your default Snapshot (the one that loads when you load the preset) and SAVE. Quote Link to comment Share on other sites More sharing options...
castingflame Posted February 19, 2020 Author Share Posted February 19, 2020 Thank you rd2rk that make sense. I'll give it a go in the morning. Sounds like I had it 'arse about face' in my understanding from the manual. Really Appreciate your help. I spend so many hours helping other with computer problems online it is great to get some help from others! Rock on \m/ Quote Link to comment Share on other sites More sharing options...
castingflame Posted February 20, 2020 Author Share Posted February 20, 2020 Okay it is working now. The problem was, as you said, I needed to assign the DRIVE in the OD to snapshots. I didn't know I had to right click on it. Thank you again! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.