ampman75 Posted February 28, 2020 Share Posted February 28, 2020 I have a stereo Y splitter cable going from the trs fx send of my HX Stomp to two mono jack effects. These in turn go back to the fx loop returns left and right on the HX Stomp (one pedal in each loop). If I use a stereo fx block the pedals work at the same time in parallel... As expected. If I use separate left and right fx loop blocks I can use them independently by enabling and disabling the fx loop. However, in an effort to save block space I wanted to only have the left fx loop in some of my presets and only the right fx loop in others. When only one fx loop block is in the signal path it seems that the effects send jack socket acts as a mono jack socket. The left fx loop on it's own therefore works fine but the right fx loop on it's own doesn't. Is there a way around this using the hardware / menu system? Thanks, Paul Quote Link to comment Share on other sites More sharing options...
phil_m Posted February 28, 2020 Share Posted February 28, 2020 Go to Global Settings>Ins/Outs and make sure Return Type is set to Return, not Aux In. Quote Link to comment Share on other sites More sharing options...
ampman75 Posted February 28, 2020 Author Share Posted February 28, 2020 Thank you! Not quite sure what was wrong. Fx return was already selected in global settings. I unplugged everything and started again from scratch and then it worked. Bizarre. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.