Delay when strumming

[vxl65703]

I need your guidance, I upgraded my Telecaster to Texas Special Bridge and pickup set and now when I do a simple strum I get a delay e.g. I do a medium to hard strum I get the dead sound I stop and sound hits the amp, there is some sort of delay. If I play each string I get good crisps sounds. but if I do a strum I get a delay.

 

My amp is a Line 6 75 Spider IV

 

Thank you

[psarkissian]

How do other guitars sound going through the amp?

Did it do that before you changed the pick-up?

 

[fflbrgst]

Does this happen no matter how you have the pickups selected?  I wonder if it is only when both are connected, and you have one wired backwards (a phase issue).

[psarkissian]

Any 3rd party active circuitry in the guitar?

[Metalmerchant11]

Guess we're never going to find out...

[caljoejoe]

I realize this is an old post but for others reading the post with the same issue, I have the same problem. The workaround is to either lower the volume on the guitar or use an effect pedal between the guitar and the amp. I'm no expert but from what I've read some guitar pickups are overloading the amp and it is invoking some protection circuitry. The effect pedal must protect the amp from an input overload. Interestingly my guitar that I have had since the mid 1980's does this behavior with the amp but it didn't used to. Like I said, I'm no expert but I hope this helps.