benu302000 Posted July 5, 2020 Share Posted July 5, 2020 I have a DT50 212 and recently picked up the pod go. I'm attempting to use the 4 cable method (yes, I am sure I have the cables routed correctly). It seems like I am not getting any tone from the amp (none of the controls affect it, including drive, channel vol, and master volume) and the only way to change the volume is with the volume knob on the pod go. I was hoping to be able to use the amp tones in the amp and use the pedal for drive/boost and wet effects. I have even disabled all of the effect blocks and the amp/cab blocks in my Pod Go preset, and nothing changes. What am I missing? Quote Link to comment Share on other sites More sharing options...
bbqchickenrobot Posted February 2, 2021 Share Posted February 2, 2021 Same setup and I discovered that if you toggle the FX loop you can switch in between the amp & the helix or just the helix alone. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.