Search the Community
Showing results for tags 'effectloop'.
Found 3 results
I have a DT50 212 and recently picked up the pod go. I'm attempting to use the 4 cable method (yes, I am sure I have the cables routed correctly). It seems like I am not getting any tone from the amp (none of the controls affect it, including drive, channel vol, and master volume) and the only way to change the volume is with the volume knob on the pod go. I was hoping to be able to use the amp tones in the amp and use the pedal for drive/boost and wet effects. I have even disabled all of the effect blocks and the amp/cab blocks in my Pod Go preset, and nothing changes. What am I missing?
Hey Hey all, so the deal is I am a new user to the Helix floor. I just installed HX Edit and HX installer update 2.8. I am running the 4CM and using the recommended send and return setup I have seen in a few videos -> AMP is a 2008 Mesa Boogie Triple Rectifier Using Send/Return #1 Guitar to Helix In Helix Send to the front of amp Amp loop send to Helix Return Amp return to Helix Out All is good. I place an effects loop in the preset and set to loop #1. Get sound and all good. I place a distortion and chorus in front of the loop, all good there. Put a delay after the effect loop in the preset and ..... nothing. No effect can be heard. I turn the loop off and get no sound at all. So the question is, why can’t I hear my delay set in the loop? Is it normal to lose all sound when turning the loop off? If I have the distortion and chorus in the front should I at least hear that? I spent an hour moving cables around and screwing around with the Mesa foot-switch engaging the loop on and off, bypassing the loop, switching cables .. nothing seemed to work. Any ideas? This is step one, next is to set up MIDI switching to I can automatically switch channels but one thing at a time.
Hi everyone, I am new in this forum. My name is Jean-Michel, I compose as one-man death-metal band Mindkiller. I have since a few weeks a Vetta II HD, and I my guitar is a LTD MH400NT with EMG 81-85. I use the preset "Chaotic Bottom", so a mix between Mesa and 5150 and I record through garage band. I am not very satisfied with the sound when I record, as I would add more "chunck" and attack in my sound. I was thinking about mixing the preset with an extern pedal but I am not sure how to do it. At the back of the head, I find two entry for external loop. Do I need 2 stereo cables, then classically add my external pedal ( in this case a old Metal Zone, as I saw a video of Ola Englund from the Haunted showing a very impressive sound with this pedal combined with a Randall amplifier ), then press "loop" at the front of the head ? Thank you for your advices! For people interested to hear a few riffs, check the video at the front page of my project : https://mindkiller-band.jimdo.com Best regards, Jean-Michel