Zeonius Posted November 2, 2020 Share Posted November 2, 2020 Hey guys! Had the Line 6 Helix Floor unit for a while now but never really used the Looper much before. Recently, I've been getting into a lot of ambient guitar music and tried to experiment with the Looper only to find out something is wrong with the looper on my unit. Attached a picture of my Helix's looper and one of a correctly functioning looper. I noticed on the footswitches of most other people, you could see the Play/Stop, Undo, Once, Record, REV/FWD signs. But on mine, there are only Overdumb, Low and Highcut ones as well as Page and Value switches and the Page ones are grayed out so I I am unable to click on them. Could you tell me what's wrong with mine, or if I'm doing something wrong, what it is and how I can fix it. Thanks a lot in advance! Quote Link to comment Share on other sites More sharing options...
phil_m Posted November 3, 2020 Share Posted November 3, 2020 Your Helix is Pedal Edit Mode in that photo. You get into that mode by holding the Mode footswitch down. It allows you edit parameters of blocks with the footswitches, which is why you see those looper parameters. In order to use the 6 Switch Looper, you need to assign the Looper block to a footswitch in Stomp Mode. When you hit that footswitch, you’ll be taken to Looper Mode where you see all the looper functions. Quote Link to comment Share on other sites More sharing options...
JJWaters Posted February 13, 2022 Share Posted February 13, 2022 Phil, I've seen several of your posts, and I have to say they're not remotely helpful. Quote Link to comment Share on other sites More sharing options...
phil_m Posted February 13, 2022 Share Posted February 13, 2022 5 hours ago, JJWaters said: Phil, I've seen several of your posts, and I have to say they're not remotely helpful. Lol… You joined to say this? Ironically, in this thread this was the correct answer… But I guess I’ll try harder for your sake. 2 Quote Link to comment Share on other sites More sharing options...
soundog Posted February 14, 2022 Share Posted February 14, 2022 JJWaters, I've read all of your posts and find all of them to be incorrect, cruel and heartless. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.