dfurdon Posted February 7, 2021 Share Posted February 7, 2021 I have connected up my HX Effects via 4CM. When I bring up one of the 4CM presets all effects before the FX block works fine, but no effects work after the FX block. I’m stumped. Any help would be greatly appreciated. Quote Link to comment Share on other sites More sharing options...
rd2rk Posted February 8, 2021 Share Posted February 8, 2021 Sounds like a wiring problem. See page 9 of the HXFX 3.0 Manual. Quote Link to comment Share on other sites More sharing options...
dfurdon Posted February 8, 2021 Author Share Posted February 8, 2021 Sorry but that doesn’t show anything Quote Link to comment Share on other sites More sharing options...
rd2rk Posted February 8, 2021 Share Posted February 8, 2021 Sorry, page 10. Sorry, page 10. Quote Link to comment Share on other sites More sharing options...
dfurdon Posted February 8, 2021 Author Share Posted February 8, 2021 rd2rk, I've got everything wired properly checked and re-checked so just not sure if maybe there is a setting I'm missing? Quote Link to comment Share on other sites More sharing options...
dfurdon Posted February 8, 2021 Author Share Posted February 8, 2021 rd2rk, again i ended up with a bad cable causing an issue. thanks for the help Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.