Lordmore Posted February 27, 2014 Share Posted February 27, 2014 Hi there. I couldnt find an answer to my problem on the web so im asking here now. My X3L's expression pedal stopped working. Since im out of warranty, i opened it and checked for solder problems and also cleaned the sensors, all seems fine. Then i rememberd that theres the Safe Mode with pedal calibration, so i fired it up and to my surprise the pedal worked, as in i was able to calibrate it (it goes smoothly from 0-255) and it also showed the "P" for passed settings (i think?) However, it doesnt do a thing in normal mode, neither in Wah, Volume nor Tweak mode. It also doesnt switch the Wah/Vol LEDs when using the toe switch, but im not to sure if it even does that in the first place since i only use it in Tweak mode. I already tried it with factory resets + firmware rollbacks. I dont really know what else i could try. Do i have to save/apply the changes i made in Safe Mode, appart from saving the calibration itself with the D stomp knob? Would be nice if someone could suggest anything, or maybe even had this problem before and solved it. Thanks. Quote Link to comment Share on other sites More sharing options...
featherrun Posted June 1, 2014 Share Posted June 1, 2014 ME TOO ï¼SOMEBODY tell me WHY ~~~ Quote Link to comment Share on other sites More sharing options...
featherrun Posted June 2, 2014 Share Posted June 2, 2014 I like your question, you can put a similar tone into tone1 and tone2, then open the double tone, then pedal can work, but only one tone at work. I guess that is where the software is wrong, no way, only this first with it. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.