delosmuertos Posted March 1, 2014 Share Posted March 1, 2014 Hi, i just got a POD HD500 with the latest firmware in my hands. I've noticed a latency when switching the presets. I've also read, that this is an issue when the device is conncetd to POD HD500 Edit software. But there is still a noticable latency when nothing is connected. Is there any opportunity to get rid off this? Thanks Daniel Quote Link to comment Share on other sites More sharing options...
silverhead Posted March 1, 2014 Share Posted March 1, 2014 There is going to be a slight latency (a few ms) when switching presets. This is unavoidable - the device needs to reload data (the new preset) into it's working memory and this process takes at least a small amount of time. In most cases it's not a problem but in some situations you may need to adjust your playing so that the latency is not noticeable. For instance, create a slight pause in your playing while switching presets. 2 Quote Link to comment Share on other sites More sharing options...
delosmuertos Posted March 2, 2014 Author Share Posted March 2, 2014 A okey then I have to deal with it. Thanks for the fast reply. Quote Link to comment Share on other sites More sharing options...
pfsmith0 Posted March 4, 2014 Share Posted March 4, 2014 I have measured 5msec of latency when you use the footswitches in ABCD mode. You will notice much less latency if you can use the footswitches in 1-8 mode instead. That is, only change patches/banks between songs. Within a song you have 8 footswitches available to provide the various sounds you need. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.