dbdbdb Posted June 10, 2021 Share Posted June 10, 2021 Hey all. I have a patch with two FX loops riding on DSP-A. When the second fxloop#2 is enabled, I get weird squashing artifacts\efx centered around (C5 - 523.25) and only in the area of that frequency. Here's the kicker, I BYPASS the FXloop#2 and the signal is passed through without any weird artifacts (FXloop2 = H9Max) and I can hear the H9 without any issues or problems. (See the attached patch pic) I haven't tried my Helix rack to see if the same problem exists, because I would need to reroute of the studio and I'm not willing to do that right now. Is there a problem running two FXloops on one DSP? Why am I receiving weird squashing artifacts centered around (C5 - 523.25) when FXLoop#2 is enabled? Thanks in advance for your help. dbdbdb Quote Link to comment Share on other sites More sharing options...
CraigGT Posted June 11, 2021 Share Posted June 11, 2021 There were issues with time alignment of loops in previous builds. Update it to V3.11 and see if it clears up. IIRC the issue only affected the top path so try moving the blocks to the lower path to prove that it's the same issue. Craig Quote Link to comment Share on other sites More sharing options...
CraigGT Posted June 11, 2021 Share Posted June 11, 2021 Also if your paths are going to the same output, you are mixing a straight signal with the fx loop signal and that's bound to cause phase issues. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.