metallaca Posted March 3, 2014 Share Posted March 3, 2014 Hey folks! If anyone could help, I would really appreciate.I want to record my stuff via USB, so I connect the hd500x to the computer, but I want to record a simple clean sign, to reamp is later. Because of this, I need to monitor it with some cool distorted sound, so I though it is easy, I just connected the line out to my spider. THE problem: if I connect the hd500x to the spider during it is plugged to the pc with usb, then the sound that came out from the spider is terribly noisy. If I plug out the USB, then the noise is gone. Question one: Is it possible to kill this noise, when I use both line out and USB? Question two(more importatnt): How is it possible to record a clean sign with the hd500x, durig monitoring a distorted one without latency? (so I do not want to use the recoring software to monitor) Thank you very very much!! Cheers, Laszlo Quote Link to comment Share on other sites More sharing options...
silverhead Posted March 3, 2014 Share Posted March 3, 2014 Here's a preset designed for that purpose: http://line6.com/customtone/tone/217206 Quote Link to comment Share on other sites More sharing options...
jandrio Posted March 3, 2014 Share Posted March 3, 2014 It sound like u have a ground loop problem. Check out this one: http://line6.com/support/topic/5975-staticbuzz-when-recording-with-pod-hd-pro-in-logic-progarageband/?do=findComment&comment=40250 Quote Link to comment Share on other sites More sharing options...
metallaca Posted March 3, 2014 Author Share Posted March 3, 2014 Thank You guys, these are my answers! I wish I could mark them both with Solved button! Cheers! 1 Quote Link to comment Share on other sites More sharing options...
jandrio Posted March 3, 2014 Share Posted March 3, 2014 Glad 2 hear problem solved. Keep on ...poding! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.