CampNowhere Posted November 3, 2022 Share Posted November 3, 2022 I plan on running the helix via the 4 cable method but was wondering if it is possible to add the send/return blocks automatically to all my presets. I have a few dozen presets so I could add them manually but was just inquiring if there was an easier way of accomplishing this. Thanks! Quote Link to comment Share on other sites More sharing options...
theElevators Posted November 3, 2022 Share Posted November 3, 2022 No way to do that, you'll need to add things manually to each preset. I also don't recommend copy/pasting blocks between presets -- sometimes I get weird bypass behavior for these copied blocks when I use snapshots. Quote Link to comment Share on other sites More sharing options...
HonestOpinion Posted November 4, 2022 Share Posted November 4, 2022 On 11/2/2022 at 10:44 PM, CampNowhere said: I plan on running the helix via the 4 cable method but was wondering if it is possible to add the send/return blocks automatically to all my presets. I have a few dozen presets so I could add them manually but was just inquiring if there was an easier way of accomplishing this. Thanks! If you want to be daring, you could always do a mass edit on the backup files and restore them. Buyer beware! First be sure to get a good backup, or three. I would recommend adding them via HX Edit or the device though. Shouldn't take that long. For new presets, create a template(s) that includes your send/return blocks as your default signal chain and just copy it over when you create a new preset. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.