alejombc Posted January 31, 2023 Share Posted January 31, 2023 Hello, I am having a problem with the expression pedal of my Helix LT after the update to firmware 3.50, everything is fine but the expression pedal does not seem to work in any preset. Another strange thing that I notice is that when I start the helix in calibration mode and touch the footswitches it does not detect anything I do, but if I start in normal mode everything works, except the expression pedal, I reinstalled the firmware and everything remains the same, except Has anyone had this, any help? Pd: Physically the pedal is in perfect condition pd: sorry for my inglish... Thanks! Quote Link to comment Share on other sites More sharing options...
marco_jacobs1975 Posted February 14, 2023 Share Posted February 14, 2023 I have the same experience with my exp1 pedal. I also have an exp2 connected to my LT. Before version 3.x everything worked fine, i think this started when I updated to 3.11. Today I did the upgrade to 3.50, issue still exists. Not tested the calibration yet. Quote Link to comment Share on other sites More sharing options...
datacommando Posted February 15, 2023 Share Posted February 15, 2023 On 2/14/2023 at 8:02 PM, marco_jacobs1975 said: Today I did the upgrade to 3.50, issue still exists. Hi, This may sound obvious, but both you and the OP didn’t mention if you had done a backup, factory reset and restore the backup of your unit, as advised in the Release Notes to the firmware update. Hope this helps/makes sense. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.