Aged_Cheddar Posted November 4, 2023 Share Posted November 4, 2023 OK, so I have a technical routing question... I'm a bassist, and my main gigging rig is a Helix LT, I have it setup so the signal exiting through the XLR out (to FOH) has a amp & cab sim, then I have another signal exiting the ¼ out that has everything EXCEPT the amp & cab, that signal goes to my stage amp (when I use one)...I LOVE this setup because it allows me the option to use my actual rig too...there's just "something" about feeling that bass behind me on big stages that I just can't get enough of. So, I have a need to use my HX Stomp for a few shows that have what I would be calling...less than ideal stage real estate at the front of the stage, but have room for a small combo amp in the back. So I'm curios about using the Stomp for this group of shows, but I do use the FX loop in mono [L], so can I split my path and send path [A] with an amp/cab sim to my main output (L) then off to FOH...and then send path B without the amp/cab out of return [R] to my stage amp? I feel like this would work, but my amp is in the gear trailer so I have no way to “real world” test this...my fear is that since I AM using the FX loop even though just mono in [L], that it will still interfere with using the RET [R] as an output the way I'm thinking. Thoughts? Could This Work? Better Suggestions? Thanks in Advance!! Quote Link to comment Share on other sites More sharing options...
rd2rk Posted November 4, 2023 Share Posted November 4, 2023 On 11/3/2023 at 8:41 PM, Aged_Cheddar said: So I'm curios about taking the Stomp for this group of shows, but I do use the FX loop in mono [L], so can I split my path and send path [A] with an amp/cab sim to my main output (L) then off to FOH...and then send path B without the amp/cab out of return [R] to my stage amp? The attached example preset shows how. Use a TRS>Dual Mono (INSERT CABLE) in the SEND jack. FX Loop L (TIP) is before the split. L MONO OUT goes to FOH with the cab. Send R (RING) Outputs the same signal minus cab to your stage amp. The "DRY THRU" parameter of the SEND R block set to -120db prevents the Path B signal from going to FOH. Aged_cheddar.hlx 1 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.