edsaysrawr Posted April 3, 2014 Share Posted April 3, 2014 So the other day i was working on some tones for my SV MkII 212 thru SVMkii Edit and everything was going fineAnd then the next day when i turned on my amp i had VERY LOW SOUND. I made sure everything was connected and i even bought new tubes (the old tubes were about a year old). I cant figure out why its not as loud as it should be.I factory reset the Amp and still have the same problem! HELP I highly doubt its a speaker problem because i never push the amp to hard.Has anyone had this problem before? Your time is much appreciated Quote Link to comment Share on other sites More sharing options...
napynap Posted April 10, 2014 Share Posted April 10, 2014 Two times that happened to my SV MkII 212. First time it was old preamp tubes (1.5 years heavy usage). Replaced them and master volume at %30 was back to it's usual screaming level. Second time, the little speaker cable connection in the back had somehow popped out just a bit, but still let some current flow to the speaker. Just push it back in right away before a real problem occurs. I would also check with a different guitar or cable just in case it's related to a bad pickup, or dying battery of an active pickup. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.