Hi All, Help Needed.

[Keitho001]

Hi Everyone,

Just wondering if someone preferably UK based

Would happen to have a Broken Helix floor main 

processor board, (the small one attached to the 

In/out board.

If so I'm in need of an inductor which is situated in the lower right hand corner,

Its marked 200 M9D, Id be very grateful if i could buy it off you.

Please could you get in touch if you have such a thing.

Thanks in advance 

Keith

[datacommando]

On 2/7/2025 at 5:57 PM, Keitho001 said:

Hi Everyone,

Just wondering if someone preferably UK based

Would happen to have a Broken Helix floor main 

processor board, (the small one attached to the 

In/out board.

If so I'm in need of an inductor which is situated in the lower right hand corner,

Its marked 200 M9D, Id be very grateful if i could buy it off you.

Please could you get in touch if you have such a thing.

Thanks in advance 

Keith

Hi,

 

The chances of someone just happening to have that particular part laying around waiting for someone like you to need it are probably zero. If anyone had a broken Helix, then they are most likely to have had it repaired.

 

This is the  standard response from Line 6

 

Q: Can I fix or modify my Line 6 device myself? Can I get repair assistance from Line 6?
A: If your Line 6 product needs repair, we strongly suggest you contact the nearest authorized service center or distributor in your region. For safety and liability reasons, Line 6 does not supply customers with repair assistance. Line 6 does not offer repair assistance, circuit diagrams, blueprints or schematics to end users. Line 6 does not support the customization or modification of Line 6 products, outside of official firmware updates or hardware upgrades. Any attempt to modify or self-repair your unit will void your warranty.

 

Line 6 have a couple of Service Centres in the U.K. Contact either one, or both for an estimate on cost and turn round time.

Hope this helps/makes sense.

 

[Keitho001]

Many thanks for the response.