gpetty Posted February 19 Share Posted February 19 I have a Nektar NX-P passive expression pedal, which is basically just a potentiometer with measured range 560 ohms to about 12 kilohms. I successfully connected it to a volume block in one of my presets in my new HX Stomp XL, and it shows the level changing from 0% to 100% when I move thew pedal, and the volume of the audio output does indeed change. However, I want the range to be from, say, 60% to 100% over the full sweep of the pedal, so as to be able make minor adjustments in a live setting with better precision. On my Line 6 HD500 unit (which the Stomp XL is intended to replace), you can easily change the low end of the range of the built-in volume pedal by raising the pedal to the full-up position, adjusting the level to the desired value with correct knob, and then saving the preset. But the same procedure isn't working for on the HX Stomp XL: I can adjust the low-end level when the pedal is up and stationary, but as soon as move the pedal, it reverts to 0% I haven't yet found any way to make my adjustment stick. Is this a bug, or am I missing a step? I couldn't find any mention of this issue in previous posts, so it might just be something stupid I overlooked. (I've only had the unit for a bit over a week, and when I got it, I updated the firmware to the latest version—I don't remember the version no. offhand) Quote Link to comment Share on other sites More sharing options...
SaschaFranck Posted February 19 Share Posted February 19 How exactly did you try to limit the position value? Quote Link to comment Share on other sites More sharing options...
rd2rk Posted February 19 Share Posted February 19 In HX Edit, in the BYPASS/CONTROLLER ASSIGN pane, find the POSITION parameter and set it to MIN=60%. I have the HXS, so not sure how to do it in the UI of HXSXL. 1 Quote Link to comment Share on other sites More sharing options...
rwandering Posted February 20 Share Posted February 20 HX Stomp XL is the same. 1 Quote Link to comment Share on other sites More sharing options...
rd2rk Posted February 20 Share Posted February 20 So, on the UI Screen, select the Volume Block. Press and Hold the Position knob. Page RIGHT. Set the MIN/MAX Values as needed. Don't forget to SAVE the preset. 1 1 Quote Link to comment Share on other sites More sharing options...
gpetty Posted February 20 Author Share Posted February 20 rd2rk's answer was what I needed — I had overlooked that there were additional parameters that you had to page-right to find (I had the impression that if only two out of three spots have functions on the first page, it means that there aren't any more parameters beyond those two). Thanks! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.