JOHNNYMC5150 Posted July 23 Share Posted July 23 This is probably a common issue with an easy fix. I have a HX stomp it's fully updated. In one of my patches I have three snapshots set up. With snapshot 1 the Chorus is turn on. Snapshot 2 is my overdrive rhythm channel. Finally my Snapshot 3 is my lead channel which is basically a replica of 2 but with higher gain and a loud channel drive. The problem is when I raise my overdrive or my channel volume on snap shot 3, its saves it to all 3 snapshots but it saved it fine when I have the chorus shut off for 2 & 3. Any ideas? Quote Link to comment Share on other sites More sharing options...
rd2rk Posted July 23 Share Posted July 23 Set the CONTROLLER of the parameter you want to change to SNAPSHOTS. In HX Edit, RIGHT CLICK on the parameter to bring up the CONTROLLER options. In the SNAPSHOT where you want it to change set the desired value and SAVE the PRESET. The other SNAPSHOTS will remain at whatever value the parameter was at when you SAVED those SNAPSHOTS. IOW - you can now have different values in every SNAPSHOT 1 Quote Link to comment Share on other sites More sharing options...
JOHNNYMC5150 Posted July 24 Author Share Posted July 24 Thanks bro got it Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.