Footswitch assign in HX stomp XL

[claudeu]

I don´t need bank up/down on FS 1 and 4.

I want to use FS 4,5,6 to switch my three snapshots in the down side row.

How can I assign it?

[Schmalle]

Set Global Settings > Footswitches > Stomp Mode to 6 Switch.

Use Stomp Mode. 

Program the three footswitches by assigning each with a Snapshot Command (1, 2, 3) using Command Center.

This has to be done per patch.

[claudeu]

Thank you! 

Do I have to do this individually for each preset, or can I, for example, trigger all my snapshots 1 using foot switch 4?

 

 

[Schmalle]

On 11/16/2025 at 12:12 PM, claudeu said:

Thank you! 

Do I have to do this individually for each preset, or can I, for example, trigger all my snapshots 1 using foot switch 4?

It has to be programed per preset (aka patch). There is no global mode that does what you specified.

[claudeu]

Thanks! But still FS4 is shifting the snapshots. And in preset mode it still shows snap up/down and not snapshot 1 on FS4.

[Schmalle]

On 11/17/2025 at 12:02 AM, claudeu said:

Thanks! But still FS4 is shifting the snapshots. And in preset mode it still shows snap up/down and not snapshot 1 on FS4.

Setting Global Settings > Footswitches > Stomp Mode to 6 Switch gives you all 6 switches to program in Stomp Mode only (hence the name).

 

Set the Snapshot Command's Press parameter to the snapshot you want to navigate to (instead of Next).