larrierlad Posted April 25, 2014 Share Posted April 25, 2014 I have tried on three different computers, plugging and unplugging, I have used the monkey thing but still I cannot connect to workbench. Please can someone help me out and I would appreciate any answer in plain english, I am just a simple guitar player used to plugging in to my amp and a volume and tone knob. My variaxe led light flashes red. Quote Link to comment Share on other sites More sharing options...
phil_m Posted April 25, 2014 Share Posted April 25, 2014 What version of Workbench are you trying to use and just as important what firmware is your JTV running. Workbench HD will only work with the 2.0 firmware and above, and the old version of Workbench will only work with pre 2.0 firmware. Also, what are you using as an interface? If you're using the Workbench interface, you need to have a 1/4" cable plugged into the guitar in order for it to turn on. Quote Link to comment Share on other sites More sharing options...
Charlie_Watt Posted April 25, 2014 Share Posted April 25, 2014 And your volume knob turned up. Sounds like he might be missing the 1/4 inch jack. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.