EX2 into Stadium XL behavior

[AZGuitar]

The EX2 expression pedal is acting as if the polarity setting is reversed in Global settings.

 

I've used a Boss FV500L forever with the OG and first run SXL with polarity reversed with no issues. Crazy thing is I now notice that regardless of the polarity settings, the Boss is behaving as programmed and the EX2 is reversed. Could be my settings but I don't think so.

 

Can someone test their polarity setting? Thanks!

[gbr13697]

I couldn't get my FV500L pedals to work with the Stadium. 100% in the middle of the travel, with 0% at both ends, and reversed polarity when I experimented. Usual solutions didn't work. EV30 worked OK so I didn't pursue the problem.

[AZGuitar]

Hmmm, my FV works great but the volume pot on the side must be up all the way @Line6Tony can you comment on my EX2 question I described above?

Thanks!

[gbr13697]

I plugged in the FV500L. Setting the Maximum Volume to Max did correct the range problem as you said. I obviously didn't persevere very much when I tried it! I was able to correct the polarity via Settings > Global Settings > Switches/Pedals > swipe left twice to Flip A (tip) Polarity > set to On. This worked OK with the TS cable plugged into A/B.

Note that the setting you need is the Flip A (tip) polarity, NOT the Flip EXP 1/2 Polarity. That applies to the built-in pedal, and will reverse its polarity as you describe.

The EV30 has a polarity switch, so I had previously used that instead of delving into Stadium settings. Leaving the polarity flip set to On for the FV500L in the Stadium settings, I was able to switch the EV30 polarity switch back to Normal, so that both pedals now work.

[AZGuitar]

 

"Note that the setting you need is the Flip A (tip) polarity, NOT the Flip EXP 1/2 Polarity."

 

That's it! Thank you @gbr13697 for your help. I did not think to page further over where I had originally set that parameter for the FV.