Community : All Content - FBV MkI / MkII Controllers

The Complete Line 6 Pedal Compatibility FAQ

support@line6.com — Mon, 15 Aug 2011 21:18:50 GMT

Line 6 Floorboard:

ONLY Compatible with: AX212, 1st Generation POD/BassPOD (labeled "Pedal" above Cat 5 Connector"), 1st Generation of Spider (Red Faced) Flextone 1, Flextone II, Flextone HD.

http://line6.com/legacy/floorboard.html

FB4:

ONLY Compatible with: AX212, 1st Generation POD/BassPOD (labeled "Pedal" above Cat 5 Connector"), 1st Generation of Spider (Red Faced) Flextone 1, Flextone II, Flextone HD.

http://line6.com/legacy/fb4.html

FBV4:

Works With: Flextone™ III, Vetta™, Vetta™ II, HD147®, Douverb®, PODxt™, PODxt Pro™, Bass PODxt™, and Bass PODxt Pro™ Spider II, Spider III, Spider IV, POD XT,POD X3, POD X3 Pro, POD XT Pro.

Does NOT Work with: Ax212™, Flextone™ I, II or HD, POD™ 2.0, POD Pro™, Bass POD™, Bass POD Pro™ and

Spider 1

http://line6.com/legacy/fbv4.html

FBV or FBX Longboard:

http://line6.com/footcontrollers/fbv.html

Works With: Flextone™ III, Vetta™, Vetta™ II, HD147®, Douverb®, PODxt™, PODxt Pro™, Bass PODxt™,POD X3, POD X3 Pro,Bass PODxt Pro™ Spider II, Spider III.

NOT compatible with Ax212™, Flextone™ I, II or HD, POD® Pro, Bass POD®, Bass POD® Pro and 1st Generation (Red Faced) Spider™ Spider IV, Spider Valve, Spider Valve MKII, POD HD

**FBV is only compatible with POD 2.0 units with pedal jacks labelled "FBV Pedal." It is not compatible with older units which have pedal jacks labelled simply "Pedal."

*FBV is not compatible with Spider II 15 or Spider III 15.

FBV Express MK1(Does not have USB Port):

http://line6.com/footcontrollers/fbvexpress.html

Compatible With: Spider Valve, Spider Valve MKII, Spider II, Spider III, Spider IV, Flextone IIi, Vetta, Vetta II, HD147, POD 2.0, POD XT, POD XT Pro, POD X3, POD X3 Pro, Bass POD XT, LowDown, POD HD Desktop/HD Pro

NOT compatible with: Ax212™, Flextone™ I, II or HD, POD® Pro, Bass POD®, Bass POD® Pro and Spider 1

*FBV Express is not compatible with with Spider II 15 or Spider III 15.

**FBV Express is only compatible with POD 2.0 units with pedal jacks labelled "FBV Pedal." It is not compatible with older units which have pedal jacks labelled simply "Pedal."

FBV Shortboard MK1 (Does Not Have USB Port):

http://line6.com/footcontrollers/fbvshortboard.html

Compatible With: Spider Valve, Spider Valve MKII, Spider II, Spider III, Spider IV, Flextone III, Vetta, Vetta II, HD147, POD 2.0, POD XT, POD XT Pro, POD X3, POD X3 Pro, Bass POD XT, LowDown, POD HD

NOT compatible with: Ax212™, Flextone™ I, II or HD, POD® Pro, Bass POD®, Bass POD® Pro and Spider 1

*FBV Shortboard is not compatible with with Spider II 15 or Spider III 15.

**FBV Shortboard is only compatible with POD 2.0 units with pedal jacks labelled "FBV Pedal." It is not compatible with older units which have pedal jacks labelled simply "Pedal."

FBV2 (Does Not Have USB Port)

http://line6.com/footcontrollers/

Compatible With: Spider Valve, Spider Valve MKII, Spider II, Spider III, Spider IV, Flextone III, Vetta, Vetta II, HD147, POD 2.0, POD XT, POD XT Pro, POD X3, POD X3 Pro, Bass POD XT, LowDown,

NOT compatible with Ax212™, Flextone™ I, II or HD, POD® Pro, Bass POD®, Bass POD® Pro and Spider 1, POD HD Series

*FBV2 is not compatible with Spider II 15 or Spider III 15.

**FBV2 is only compatible with POD 2.0 units with pedal jacks labelled "FBV Pedal." It is not compatible with older units which have pedal jacks labelled simply "Pedal."

FBV Express MKII:

http://line6.com/footcontrollers/fbvexpressmkii.html

NOT compatible with: Ax212™, Flextone™ I, II or HD, POD® Pro, Bass POD®, Bass POD® Pro and Spider 1

*FBV Express MKII is not compatible with Spider II 15 or Spider III 15.

**FBV Express MKII is only compatible with POD 2.0 units with pedal jacks labelled "FBV Pedal." It is not compatible with older units which have pedal jacks labelled simply "Pedal."

FBV Shortboard MKII:

http://line6.com/footcontrollers/fbvshortboardmkii.html

NOT compatible with: Ax212™, Flextone™ I, II or HD, POD® Pro, Bass POD®, Bass POD® Pro and Spider 1

*FBV Shortboard MKII is not compatible with Spider II 15 or Spider III 15.

**FBV Shortboard MKII is only compatible with POD 2.0 units with pedal jacks labelled "FBV Pedal." It is not compatible with older units which have pedal jacks labelled simply "Pedal."

Another dead Express MK II - resumed -

support@line6.com — Sat, 13 Apr 2013 17:21:57 GMT

The original topic with the same title is blocked,.. so I started a new one.

I've already opened a ticket, with these words:

***

Got a used Fbv Exp MkII, worked fine. Already latest firmware. I used it to upgrade Spider IV 75 firmware and all went ok. As i unplug the Fbv from usb it started behave strangely, with led flashing and pedals not working. After several restarts it suddenly worked again. Use it as interface with Spider IV editor, latest version. The operation seemed a little slow, but it worked. Then i Read a preset from Spider and the software get stucked at 0%. After some minutes I kill the program and unpluged Fbv. From that moment it's completely unusable. It only light the second led from the left (tuner led) and the only pedal that seems alive is the B, when pressed it lights its own led and the first right led of the tuner. Fbv does not go into calibration mode in any way. The same happens with Usb power supply (without a computer, only a usb battery charger like iPhone) and with RJ45 power supply from the Spider.

***

I tried again after some minutes, just to see if it could word as an interface for the Spider. With both usb and rj45 connected I got some hum from the speaker, and then all the leds turned off.

Now, as I power the fbv, I got only a fast blink of all leds, and nothing more.

Since the original thread is a bit old, I was wondering if anyone managed to solve the Fbv problem.

I' m from Italy and the unit isn't under guarantee anymore,...... maybe I should start thinking about a new shortboard (if this model is not affected by this great BUG)?

two heads one fbv mk2

support@line6.com — Tue, 23 Apr 2013 00:14:43 GMT

can i control my spider hd 150 and spider valve mk2 120 at the same time with one fbv mk2?

and if so how?

FBV MKII and iPad

support@line6.com — Tue, 05 Feb 2013 22:45:28 GMT

I have read that the FBV MKII contains a class-compliant USB port (required for iPad compatibility) and is also fully programable with a PC (needed for midi mapping to iPad apps functions) but I am still not 100% sure it will work with the iPad and camera connection kit...

1. When you program the FBV, does it store the midi commands in internal memory? Or do you have to open the Midi editor every time you use it? Meaning, could I program it with my PC and then connect it to my iPad with all of the programmed midi commands still stored in the FBVs internal memory?

2. Has anybody used it with an iPad and want to share their results? I want to be able to control Loopy HD, Animoog, and other iOS apps that allow midi control.

Thanks!!

Shortboard MKII & PodHD Desktop: Board reconfigures Pod -> ProTools crashes due to setting changes in audio device

support@line6.com — Thu, 18 Apr 2013 09:01:08 GMT

Hi there,

I'v been using an Pod HD Bean together with ProTools 9 & 10 for more than a year now. A few days ago I bought an FBV Shortboard MK2 and configured the corresponding Midi-MMCs so that I can control ProTools' Transport Window with the Shortboard. So the Shortboard is connected to my PC via USB and the Pod Bean too. Both devices are connected to an USB-Port on my PC directly (not through an USB Hub).

I did some ProTools recordings through the Pod HD Bean and used the Shortboard for controlling the ProToosl' Transport Window. It works well as long as I do not have the Shortboard connected to the Pod Bean via the RJ45 cable during the recording session. If I connect the Shortboard and the Pod via the RJ45 too, ProTools crashes every time saying that the audio device has been reconfigured and that ProTools needs to be restarted. But right after the restart, the problems appears again. The problems stops as soon as I disconnect the Shortboard from my Pod Bean.

It seems that the Shortboard sends configuration data to the Pod although it is connected to my PC via USB where the Shortboard is used as the control device for ProTools' Tranport Window. I wouldn't have expected any data communication between the Shortboard and Pod as soon as the Shortbord is connected to the PC and used for the Midi-MMCs.

Is there a solution for this problem? I'm afraid that the RJ45 connectors will be damaged some day if the cable will be connected and disconnected very often.

Thanx in advance,

FBV mk2 volume controlling via 75 watt spider 4

support@line6.com — Mon, 15 Apr 2013 00:20:53 GMT

i have had this amp almost 2 years

have read the manuall and followed the steps i believe to be correct

I created a patch of my own,stored it in a bank,however its giving 100% volume with the pedal ful forward but full back i want the volume to 0% but i would say full back its pulling the volume back to around 40%.

Tried....yes..i have tried to correct this via the edit but to no avail!

Anyone know how to tweak this so i get 100% forward and 0% pulled back on the pedal?

kaputt?

support@line6.com — Thu, 14 Feb 2013 16:12:02 GMT

hallo,

habe mein fbv Express an den Computer anschließen wollen.

Als ich dies tat leuchteten alle LED's auf und auf dem Computer erschien USB gerät wurde nicht erkannt.

Ich hoffe ihr könnt mir helfen.

Quick Capture in Spider Jam w/ express mkii

support@line6.com — Sun, 14 Apr 2013 14:43:32 GMT

Hello. I have a Spider Jam 75W amp and a FBV Express Mkii, and there's a instruction on the pilot's guide manual about a quick capture, but I tried and I couldn't get it done. Could you please help me? I don't know if there's a problem with one of the two equipments or it's just me not understanding exactly what I need to do. Sorry for my bad englis.

Thanks in advance.

How do you TURN OFF Manual Mode on Shortbaord Mk II?

support@line6.com — Wed, 10 Apr 2013 17:05:48 GMT

I have a Pod XT Pro with a FBV Shortboard Mk II and sometimes when I switch channels it goes into manual mode if I hit the button wrong.

This is a big problem because when it does this my amp volume jumps up really high and just irritates the rest of the band and me as well.

I'm not sure how exactly it does this, it just reads "MANUAL" on the pedalboard and everything goes haywire. I just want the buttons to do

the basic operations, up/down on the banks - turn on/off my Stomp, Modulation, Delay, Reverb - Work Channels A thu D - and the Volume/Wah pedal.

The tap button I don't even need to work really because I set all that up in my channels.

I would be nice if there were an explanation of what all the values mean and exactly what they do in the FBV Control Software, like MMC, and MIDI CC.

Some are strait forward, but others are a little confusing.

I also have the same problem if I accedently hit the Function 1 or 2 buttons. So I would like to disable those as well.

FBV EXPRESS MKII + POD XT do not work together

support@line6.com — Sat, 23 Mar 2013 10:36:36 GMT

what could be the problem?

New FBV express MKII with legasy POD XT

new cable, standart preset for FBV

http://www.youtube.com/watch?v=xsuVVtiQMS8