Community : All Content - Line 6 X2 Digital Wireless

I need a replacement clip for the TBP12 transmitter

support@line6.com — Sat, 09 Mar 2013 00:42:08 GMT

I borrowed a friend's TBP12 transmitter while mine was out getting repaired. As I borrowed it for a month, the clip bent because my strap was thicker than his. As a result, the clip bent. I need to get a replacement clip for this. How do I go about getting a new one. Thanks.

Joe Milano

xdt4 transmitter

support@line6.com — Fri, 04 Jan 2013 18:06:18 GMT

they only problem that i recently ran into is that my transmitter will immediately shut off after turning on, i have tryed changing they battery, modes, everything. anything i can do?

Where can I get my X2 transmitter serviced?

support@line6.com — Tue, 18 Dec 2012 00:36:09 GMT

I have an X2 wireless guitar transmitte that needs to be seviced. After changing out the battery, the power indicator lights no longer light up. Might just need to have the contact wires to the battery resoldered.

Where can I have the unit serviced???

Thanks!

XDR95 short signal dropouts

support@line6.com — Tue, 13 Nov 2012 12:23:35 GMT

Hello,

so I bought probably best wireless I could afford - the price / performance is just incredible - for my rack setup. And of course it is second-hand buy via e-Bay.

The problem is that I'm getting really short signal dropouts. I can't say if the receiver goes completely OFF and then back ON but sure thing is, that all 4 RF signal diodes on receiver go dark and then after 1-2 seconds back on green. It causes 1-2 second long sound drop. I would like to know what's the matter.

...I will try to take a video record of the situation so I could see if the receiver goes completely off or only signal.

But what are the potentional problems?

I'm using XDS compatibilty mode because I don't have XDT4 transmitter. I got only XDT1 transmitter.

I'm from central Europe and I just found out that XDR95 is supposed to work only in North America. Is it possible cause?

Could the POWER SUPPLY cause the problem?

...ideas?

Thanks,

EDIT: So it looks like solved problem. I must leave this beautiful gear to someone who can use it without distraction by cellphones.

Line 6 XDT4 transmitter

support@line6.com — Sat, 10 Mar 2012 19:37:04 GMT

Hi, could you tell me if there are service centers that still service the X2 line of wireless units, having a problem with my Line 6 XDT4 transmitter..Love the unit but the transmitters are always breaking on me...Would love to get the G90 but funds are tight these days...Thank You

Mark

G90

support@line6.com — Mon, 31 Oct 2011 08:01:44 GMT

Hi there,

I have been happily using my G50 for guitar in one band and am now thinking of getting a G90 and

a couple of XVD-70s for vocals. Love the gear. My question is pretty simple though.

I live in Australia with its 240 v power system but the price here is almost double those I can buy direct

from the states. Is there a switch on the back of the receiver units that determines the 120-240 input and

so can I buy direct from the states and just use a standard IEC power cable, or are these units incompatable

for some reason? I am looking at a saving of over $300 per unit if I can buy them from the US. The difference will force me to

other brands...

cheers

Geoff

Relay G50 cable

support@line6.com — Thu, 03 Feb 2011 17:07:32 GMT

You're kidding with the cable length for the Relay G50, right? I can't use it on my strap, must put it in my back pocket. Do you make a longer cable?

X2 wireless replacement button?

support@line6.com — Mon, 17 Sep 2012 05:58:42 GMT

I've had an xds95 wireless for quite a while now. when I first got it I had problems with signal cutting out constantly, it didn't matter whether I was 10 feet away or standing right next to the receiver. It was a christmas gift so I didnt worry too much about it, just boxed it back up and set it aside. well since I have moved and thus dug it out of the closet and thought to ask one of my friends to have a look at it and see if there was anything he could do. sure enough he fixed it, turns out it was a ground wire shorting out or something. I'm not good with that type of stuff. but Ive noticed that the channel button on my reciever is missing. I'm not sure how but its gone completely. it's not inside it or anything. I'm just wondering if theres any way I can get another one? thanks if anyone has any info at all!

x2 and v70

support@line6.com — Thu, 13 Sep 2012 13:16:25 GMT

Aside from the antenna missmatch giving you a reduced range of operation, would there be any other implications attaching the x2 to the end of the v70 antenna chain in my rack?

Line 6 Digital Wireless IEM Systems.

support@line6.com — Mon, 13 Jun 2011 12:47:26 GMT

When is Line 6 going to release their Digital IEM Wireless System. I ask because it's only a matter of time and I've been waiting for to long. I am so sold on Line 6 Digital Wireless after using the Relay and XD Systems over these higher priced UHF competitors. Come on Line 6, it seems we need to give you guys a nudge or two.