Community : All Content - Studio Modelers / AM4

Echo Pro Documents (Preset Chart)

support@line6.com — Fri, 02 Mar 2012 22:15:17 GMT

I've misplaced my preset guide that came with my Echo Pro. I can't find any documents online for the chart (the laminated one that goes through factory presets and what the expression pedal controls). Does anyone have a digital copy or can someone scan this for me please?

Thank you!

How to stop "digital spillover" when changing patches on Echo Pro

support@line6.com — Tue, 06 Nov 2012 06:16:18 GMT

Hi...I am running my Echo Pro (love it) between a preamp (Egnater M4) and a Randall RT2/50 tube power amp. It sounds insane except for the following small issue.......when I change switch channels and the delay patch changes, there is a (for lack of better words) digital sounding spillover or warping sound. Is there a way to set the unit so the effect is cut off when I make a switch? It seems like it would have to do with "ducking", however I am not sure, nor am I sure on what to do program wise. Any help would be awesome...thanks! Rick

Echo Pro with Midi Mate controller

support@line6.com — Sun, 08 Apr 2012 02:50:34 GMT

Got an echo pro hooked up to a Rocktron midi mate controller, but the patch numbers are not in sync.

Is ther any way this can be offset so they are in sync?

toneport ux8

support@line6.com — Tue, 13 Dec 2011 16:52:37 GMT

hola compañeros:

tengo un toneport ux8 que recientemente he comprado. Mi problema es que no se si esta estropeado o que no se usarlo y me gustaria informarme antes de nviarlo a reparar. E problema es la segunda salida de auriculares, no se escucha nada. Intento conectar dos instrumentos a la vez por los canales 1 y 2 , el auricular 1 se escucha correctamente, pero el 2 , en el cual esta escrito 3-4, no aprecio ningun sonido.

Mi pregunta es:

¿tengo que configurar algo mas? (En el apartado "line 6 audio- midi devices" tengo las entradas 1 y 2 para instrumentos y las demas para microfonos)

¿está estropeado y tengo que enviarlo a la tienda?

Help with MIDI control of Bypass and Program select please?

support@line6.com — Fri, 07 Oct 2011 02:42:21 GMT

Hi,

love the sounds of the DL4 - just aquired an Echo Pro and would like to understand how to use bypass and program changes from a sequencer:

I have created a midi track in Logic and put some PCs in - I start with 007 in measure 1 and then follow it with 000 (enable bypass) in say bar 2.

I start playback for the first time and, great, the Echo Pro switches to program # 7 then the bypass button lights up with the 000 in bar 2.

All is well methinks!

But, when I start the track again from the beginning, the 007 has no effect, it stays in bypass mode.

Help!

What am I doing wrong?

Thanks in anticipation for any help.

Patrick

SW Florida

Midi foot controller to Echo Pro

support@line6.com — Fri, 30 Apr 2010 08:14:35 GMT

Dear Support!

I am a very satisfied owner of a Echo Pro, which I use mainly for looping, it sounds and works great!

But I need a midi foot controller, either just a small one with 2 buttons for record & stop or maybe a larger one with expresson pedals

What do you recommed?

Kind regards

Nikolaj Wolf

Bypass toggle help?

support@line6.com — Sat, 16 Apr 2011 22:22:50 GMT

Hi all - I have a FilterPro in a midi controlled loop switching system (DMC/Voodoo Labs GCX with Ground Control Pro floorboard).

I DO NOT have a midi controller assigned to the FilterPro's bypass function (obviously, I don't need to, I switch it in and out of the signal path with the GCX) - HOWEVER: sometimes the very act of changing programs via my MIDI floorboard puts the FilterPro into bypass mode and I have to send the program change again to engage the effect.

I see in the FAQ that this dance will be necessary IF I have the bypass assigned to a midi CC, but I don't - why is it doing this? Is there any way around this problem?

Thanks in advance!

Manual for Pro Mod and Pro Filter?

support@line6.com — Wed, 23 Feb 2011 18:38:21 GMT

I need to get a manual for my pro mod and pro filter, how do i do that?

Filter Pro not turning on??

support@line6.com — Wed, 26 Jan 2011 23:08:02 GMT

I recently bought a used filter pro and set up for the first time and was working great, then the second time I came back to try to turn it on and get no power at all?? Do you think it can be fixed?

Delay Time Glide and Firmware

support@line6.com — Mon, 06 Dec 2010 21:49:00 GMT

Hello,

I have an Echo Pro which has a feature called Delay Time Glide (GL). It makes an audible glide sound as it moves to the new tempo from preset to preset. I don't like this, so I turn it off. When I turn the unit off or when I've been using it for a while, it will turn ON automatically. Not sure why, but I'm wondering if there's a fix.

I'm assuming this is a new feature (right before the unit has been discontinued) because it's not in the manual. Since this is faulty, can I load an earlier firmware to correct this problem?

Please let me know.

Thanks,

Steve