http://line6.com/support/index.jspa?view=discussions Most recent forum messages en Tue, 16 Oct 2012 01:47:13 GMT Jive SBS 4.5.7.0 (http://jivesoftware.com/products/clearspace/) 2012-10-16T01:47:13Z en http://line6.com/support/message/395638?tstart=0#395638 <!-- [DocumentBodyStart:794523f7-0455-46bb-a1f4-bc42d10b5a69] --><div class="jive-rendered-content"><p>Checked all leads, good. I got output back after I did the pedal calibration, but cannot explain why it lost it in the first place. Still have no explanation for the presets knob functioning like it does either.</p></div><!-- [DocumentBodyEnd:794523f7-0455-46bb-a1f4-bc42d10b5a69] --> Tue, 16 Oct 2012 01:47:13 GMT support@line6.com http://line6.com/support/message/395638?tstart=0#395638 2012-10-16T01:47:13Z 7 months, 1 week ago 0 http://line6.com/support/message/395392?tstart=0#395392 <!-- [DocumentBodyStart:96efc56a-c8ff-4897-8e8d-5526d08eede0] --><div class="jive-rendered-content"><p>I'm in the process of setting up some presets on my HD400, lots to learn and apply. Last week I had to travel so I unplugged everything and did not return to my project until yesterday. Upon completing my normal rig setup, I noticed I had no sound output from my guitar. Researching the chain, I had an iPad linked via the mp3 input&#160; that was operating fine and had normal output, and had guitar output in the wha mode of the pedal only. Discovered that the vol pedal required a calibration, and i'm not sure why.&#160; Also discovered that the parameter adjustments, done using the presets knob, are in the coarse adjust when in the normal position and go to the fine adjust when pushed in. Sort of opposite to the way the manual describes the function. Has anyone experienced these issues or have an insight as to what may be wrong?</p></div><!-- [DocumentBodyEnd:96efc56a-c8ff-4897-8e8d-5526d08eede0] --> Sun, 14 Oct 2012 11:09:22 GMT support@line6.com http://line6.com/support/message/395392?tstart=0#395392 2012-10-14T11:09:22Z 7 months, 1 week ago 2 0